Equipment
-
$12.95Dip Tube For Corny Kegs - Liquid
Replacement liquid dip tube for 19L corny kegs. If you need one for a 9.5L keg, then simply cut it down to length. Don't cut it too short, because it's much harder to make it longer than it is to make it shorter.
-
$7.50Coupler main (bottom) O-ring - No.9
Coupler replacement (bottom) O-ring. Keg couplers are used in many commercial and home environments.
This is a replacement seal for when the original seal gets worn out.Compatible with Micromatic and all 'D and S' type couplers.
Dimensions: 24MM ID x 33.5MM OD
-
$1.00Pressure Relief Valve O-ring
8mm x 5mm (metric) 3/16" x 5/16" (imperial) - perfect fit for replacing the o-ring on cornelius type lid pressure relief valves -
$1.00Poppet O-ring
6mm OD x 3mm ID (metric) 1/4"x1/8" (imperial) o-ring for replacing poppet seals on corny type keg posts.
-
$9.95Ball Lock Keg Liquid Jumper Post - Double Ended Corny Post
We've seen some nifty tricks of how people wash their Kegerator lines if they have multiple taps. This compact solution is going to make that routine cleaning day a breeze without having to swap disconnects to the cleaning keg/bottle or dismantling multiple ball locks. Just jump on the jumper post.
-
$65.00Ball Lock Tapping Head to 2inch Tri-Clover (Commercial Keg Adaptor)
Most commercial kegs will use a traditional type keg spear like d-type keg spear (American Sankey) or the a-type keg spear (German Slider). These keg spears have been designed for commercial use and will use larger and high flow rate commercial keg.
Out of Stock -
$12.95Cornelius Type Ball Lock Post with 1/2" Male Thread
A ball lock keg post with 1/2? male thread, used on Mytton Rodd kegs but could be used on ball valves or tri-clamp fittings with 1/2" thread. -
$3.95 -
$5.95PCO1881 Gas Pressure Relief Valve Cap (PRV)
This cap has been designed to be used with the PCO38 Tapping Head for the PET Mini Keg Range.
As it is a standard PET bottle thread (PCO1881). it can also be used on the FermZilla Collection Container / Lid. -
$59.95Carbonator Reactor - Carbonation Lid for Continuous Soda Water
This is the easy way to have continuous soda water on tap. Don't waste your time with Sodastream or other more expensive carbonators. This simple device makes it easy to have continuous carbonated soda water fed from your mains water supply.
