Equipment
-
7cm Funnel
This funnel has a span of approximately 7cm, and an external diameter of approximately 0.7cm at the bottom. The overall height is approximately 7.5cm.
-
Hop Straining Bag with drawstring - small
A reusable straining bag made from strong nylon mesh.
Ideal for small hop additions or adding oak to your brews.
It's also easy to clean and sanitise.Sizes approx. 200mm x 200mm (Small)
-
Fine mesh Straining Bag with drawstring - large
A reusable straining bag with drawstring made from strong nylon mesh.
Ideal for large hop additions or straining out grains.
-
Strainer - 148mm
Strainer / Seive 148mm wide with a coarse mesh.
Perfect for straining hops, spices or fruit.
-
3 Output / 3 Way Manifold Gas Line Splitter (1/4" thread, 6mm Barbs)
These gas manifolds are rated to 100psi and include ball valves that screw into the aluminium extrusion with 1/4inch threads.
This is an easy and convenient way to split your single gas line into multiple gas lines.
NOTE: This product is not suitable for beer or other beverages. It's gas only.
Out of Stock -
Premium Plus Micromatic Regulator Dual Outlet
Premium Plus Micromatic, dual guage CO2 Regulator for your kegging system. This high quality regulator will allow constant pressure supply at high output flow rates. Now comes with adjustment knob to alter the pressure, or use the allen key provided. The two stainless outlets come with shut off valves, and allows you to run two or more kegs at the same pressure.
-
Single CO2 Regulator - MK4
The MK4 regulator provides reliable gas control. It has a large body for high flow rates and comes with a precision diaphragm for accurate adjustment, and also has a large adjustment knob for easy adjustment.
Comes with 8mm push in fitting. -
Add-On CO2 Regulator Adapter
Ideal for dispensing two draft beers that require different CO2 pressures. Modular design makes expansion easy. Simply remove the high pressure gauge from one regulator and screw this adapter. Then attach your other regulator directly to the other side of this adapter. The two threads are ¼” NPT and Type 30 UNF to suit our CO2 regulators and many other Australian CO2 regulators. -
Regulator washer
Standard nylon washer for ensuring no leaks attaching your regulator to your CO2 bottle.
Outer diameter = 18mm x internal diameter = 11.5mm x 3mm thickness