Equipment
-
Vintner's Harvest VHA Wine Bottle Agglomerate Corks 38x24mm. Bag 100
An economical good quality composite cork - new technology has made these corks better than ever.
-
Vintner's Harvest Plastic Top Colmate Corks 29x20mm. Bag 30
The Colmated (Bellcork) is one of the most popular corks. The Colmated wine cork is made of natural cork and then treated with a colmated process to fill the outer imperfections of the cork. This process combined with the surface treatment gives the Colmated cork improved sealing ability. -
Novatwist Wine Bottle Screw Cap x 30
Novatwist is a next generation screw cap for table wines. Suitable for use on both glass and PET wine bottles. Can be applied manually by hand making it perfect for home bottling. Featuring a tin saran liner, ensures that the seal between the wine and the bottle is the same as traditional metal screw caps.Out of Stock -
Black Grommet for airlock hole in fermenters
A "doughnut" shaped black grommet for the standard airlock hole in plastic fermenters. Compatible with both Senior and Vintage airlock type. Has a centre groove which allows it to clip into the fermenter lid, making it more resistant to being pushed out if pressure builds up during fermentation. -
Rubber stopper / bored bung. #10 w/airlock hole (for plastic carboy)
Rubber stopper / bored bung #10 with airlock hole.
Fits our 11.5l & 23l plastic foodgrade PET carboys perfectly.
#10 size is a standard bung size, in this case 41mm diameter across on the small side, going to 51mm on the wider side. -
Bored Bung 28-30mm
Demijohn Bored Bung 28-30mm - with an airlock hole.
Fits perfectly a 5l (FLIP TOP ONLY) glass demijohn for a tight seal.
Not compatible with the wide mouth screw top demijohns.Typically made from rubber or silicon.
-
Tophat Grommet
The top-hat or T-shaped grommet is a popular choice for use with an airlock in a fermenter lid. Tophat grommets are more robust than the black doughnut shape alternatives which can become damaged, however they are more easily popped out if there is excessive pressure build up in your fermentation vessel due to a blocked airlock. -
Vintner's Harvest Heat Shrink Capsules - Gold x30
Used to dress the wine bottle after corking. Place capsule over bottle & hold in position while dipping in boiling water. Alternatively use a hairdryer or hold above element to shrink the plastic tightly to the bottle.