The Stout Spout extension can be used on any of the Nukatap beer taps. It has a removable creamer/aerator disc inside that is specially made to serve beers infused with nitrogen gas, and allows the nitrogen gas to flow smoothly through the faucet with the beer to create a smoother, creamier beer. Simply un-screw the regular nozzle and screw on the Stout Spout and use as you would a stout tap.

This is a basic closed transfer kit for transferring from a simple bucket fermenter to a keg.

Get you beverage from your plastic bucket to your keg without exposure to oxygen. Keep your beer fresh!

See our video for how this works. 

This is a EPDM 5/8 Washer which is suitable for Keg Couplers and Tap Shanks

Specifications:
15mm ID x 21.5mm OD x 3mm

Bronco / Picnic Party Taps are an inexpensive way to pour beer and great for portable light weight systems that you can take away with you.

Now even better with the addition of duotights. No more hose clamps or stretching hose over barbs! It also makes it easy to disconnect and balance hosing if required.

Looking for the barbed picnic tap? You'll find it here.

From: Kegland

A repair kit for the Krome stout tap.

Easily repair faucet leaks simply by replacing the gaskets used within. Refer to the secondary image to get a clear understanding of what goes where. It doesn’t need many tools for this job.

This jacket will keep your FermZilla All Rounder 30L cool in summer and warm in winter. It can also be used with a heater belt to warm up the wort if the heat from the fermentation isn't enough. To control the temperature, we suggest using a MKII Programmable Temperature Controller.

This jacket also completely blocks any light/UV to prevent light struck or skunked beer.

The Ss Brewtech Inline Oxygenation Kit, designed to oxygenate wort during transfers to Brewmaster Chronicals and Unitanks.

• Fully welded oxygen stone, with all sanitary 1.5" tri-clamp connections
• 1.5" tri-clamp oxygen stone, 1.5" tri-clamp Micro Tee, and 1.5" tri-clamp Sight Glass
• (2) 1.5" tri-clamp clamps, and (2) 1.5" tri-clamp gaskets included
• 3/8" barbed oxygen inlet with ball valve to control flow
• All 304 stainless construction