DIY Tap Handle Inserts - Dual Threaded - 3/8″-16 threads, .625″ Length.

Want to make your own unique tap handles but the thread type is strange? These simplistic brass inserts are the answer.

All you'll need is a 12.7mm (1/2") hole drilled into your handle (Pine, Red Gum, Oak, Cherry, Maple, etc), then screw in with a large flat screw driver.

It is important not to push down too hard if you're going to using a screw driver, or wide drill bit. It will strip the thread. Let the piece cut into the wood. Ensure that it is straight.

Suits NukaTap and Intertap taps

These can be used with any kegerator as they are compatible with gas bottles with a standard thread. To use it with the new kegerators, you just need to remove the hose barb.

The Type 50 for Nitrogen - MK4 Dual Gauge gas regulator is the only regulator you'll ever need to buy for a deluxe nitrogen stout/cocktail setup. With a large body and precision diaphragm, this regulator provides high flow rates and very accurate adjustments in both PSI and KPA.

A new 5kg CO2 (Alloy) bottle, supplied full. This bottle holds more CO2 than most in homebrewing. The bigger the bottle, the cheaper the CO2 refill per kg.

We believe this bottle is priced very competitively.

This product has to be shipped as "Dangerous Goods" so please allow a day or two extra for delivery.

This is a fantastic way to make a CO2/Nitrogen gas board so you can control, monitor and display the different pressures to a multi-keg draft system.

These food grade, polypropylene regulator gas boards allow you to mount your mini inline regulators to your wall so you can supply gas to various kegs at different pressures. The mounting holes for the wall mounting are pre-drilled, the holes for the regulators are pre-drilled and this makes installation really easy.

74g CO2 Cartridge | The Big Bulb | (5/8-18UNF Thread).

This CO2 Cartridge has a much larger thread than the standard 16g bulbs. It will require a different bushing if you are to use it with the 360 Core Mini Regulator. It does not suit other regulators in the KegLand range.

Traditional analogue gauges require a small capillary mechanism where a small pipe expands and unravels under pressure. This in turn drives a mechanical cog to rotate the gauge needle.  This age old technique works quite well especially in large gauges but as this mechanism is manufactured smaller and smaller a tradeoff between accuracy and size becomes the issue.  With very small gauges such as a 27mm x 27mm Mini Gauge it's difficult to make them better than 10% accuracy due to the physical constraints of the mechanical components.

A stainless steel gauge guard for MK4 regulators (Bump Guard).

Are you like us and bump and push in your kegerator too hard up against the wall with the gas bottle on the back, maybe you've broken a dial in the process of dropping or transporting your gas bottle with the regulator attached. Or perhaps you're in a busy cafe/bar and someone needs to change over the tank and they drop the regulator, smashing the dial. That's money wasted and time spent without whats on tap. If you're like us then you need our tough stainless steel regulator bump, bash, smash and drop (within reason) guard protector. Designed and built by those who are tired of replacing gauge and getting refills for a simple accident.

Unlike most Gauge Guards/Gauge Cages this particular design is made completely from one piece of 304 stainless steel so it won't rust over time.

This Portable CO2 Kit will allow you to take full advantage of your kegs, and mini kegs in particular!

Dispensing a perfectly carbonated brew just got even easier.

With the portable dispensing kit, you can dispense straight from the keg (think party kegs!) which means you can take your home-brew to parties, BBQs and other gatherings.