Fermenters
-
$15.00FermZilla - All Rounder 30L/60L Base Support Webbing / Strap / Bridle / Carry Tie Down
This handy little strap will make cleaning and transport your FermZilla All Rounder 30L or 60L an absolute breeze. Simply attach through both sections of the base in the orientation you wish. Slide up and out of the little buckle pieces making sure that the buckle is facing towards you, then strap in and strap down!
The Strap is long enough for the 60L FZ-AR and 30L. We recommend rolling up the excess strap and paper clipping or cutting to suit the 30L.Out of Stock -
$12.9560cm Thermowell - 1/4inch Duotight Bulkhead Included
This thermowell fits into any 8mm Hole and can literally be installed into almost any fermenter lid.
-
$8.50Bored Bung 19mm - 26mm
Bored Bung 19mm (Barrel) (19mm to 27mm) - red rubber with an airlock hole.
Compatible with the Mangrove Jack's Stainless Stell fermenter. -
$8.50Thermometer Bung 22mm. Black (22mm to 28mm)
Thermometer Bung 22mm. Black (22mm to 28mm). This bung has a smaller diameter bore than a standard bored bung, which makes it suitable for mounting a 30cm Glass Thermometer (available separately). -
$0.95Black Grommet for airlock hole in fermenters
A "doughnut" shaped black grommet for the standard airlock hole in plastic fermenters. Compatible with both Senior and Vintage airlock type. Has a centre groove which allows it to clip into the fermenter lid, making it more resistant to being pushed out if pressure builds up during fermentation. -
$8.95Rubber stopper / bored bung. #10 w/airlock hole (for plastic carboy)
Rubber stopper / bored bung #10 with airlock hole.
Fits our 11.5l & 23l plastic foodgrade PET carboys perfectly.
#10 size is a standard bung size, in this case 41mm diameter across on the small side, going to 51mm on the wider side. -
$5.50Demijohn Solid Bung 28mm-30mm (23L Jar) (28mm to 32mm)
Demijohn Solid Bung 28mm-30mm (23L Jar) (28mm to 32mm)
Fits 23l glass carboys and 5L demijohns.
-
$3.95Top Hat Grommet
The top-hat or T-shaped grommet is a popular choice for use with an airlock in a fermenter lid. Tophat grommets are more robust than the black doughnut shape alternatives which can become damaged, however they are more easily popped out if there is excessive pressure build up in your fermentation vessel due to a blocked airlock. -
$4.95Bored Bung 28-30mm
Demijohn Bored Bung 28-30mm - with an airlock hole.
Fits perfectly a 5l (FLIP TOP ONLY) glass demijohn for a tight seal.
Not compatible with the wide mouth screw top demijohns.Typically made from rubber or silicon.
-
$4.003/4" threaded barrel bung for plastic fermenters / cubes PC4904
3/4" threaded barrel bung for plastic fermenters / cubesOut of Stock
