Bottling
-
$9.95Italian Bottling Valve and Italian Tap Adaptor
If you have an "Italian" style fermenter tap and wish to use a bottling wand, then this handy adaptor is required. It's the same piece as the middle of the Brew Bottler, which means if you have lost that part of your brew bottler this can be used as a replacement part. -
$5.30Double Ended Sugar Measurer
Exact measure every bottle for consistant carbonation of beers, with a built in funnel for each end.
For 375ml and 750ml bottle sizes. Takes the guesswork out of using sugar, the cheaper alternative to carbonation drops.
Out of Stock -
$5.00Blue Bottling Valve
The blue bottling valve attaches to your tap to fill your bottles quickly and without waste.
-
$42.00Siphon Bottling Kit (580mm)
This handy little siphon to bottle kit does exactly that. Siphon directly out of any vessel above the sediment line directly into your bottles. This is a far easier method than moving all of your bottles up to a tap or wand for filling.
Simply start the siphon and use gravity to fill your bottles whist holding the brew bottler, moving from bottle to bottle.
-
$93.95Bench Capper Super Automatica
Bench Capper Super Automatica
Bench cappers are the fastest and easiest to use bottle cappers for crown caps. Ideally you screw it down onto your work bench for more stability. -
$41.00Red Twin Lever Bottle Capper
Use with crown bottle caps to cap your bottles of homemade beer or cider. Can be used with re-usable standard crown beer bottles. No mounting needed. High quality product made in Italy. -
$8.95Mangrove Jacks Crown Seals x 150
Mangrove Jacks Crown Seals x 150. Designed to fit standard crown seal bottle types and for use with any standard bottle capper.
As with everything that comes into contact with your beer, we recommend sanitising bottle caps prior to use. Caps be sanitised by boiling or by soaking in sanitiser. -
$23.50Super Automatica Tirage Bell - 29/31mm (large)
For use on the Red handle "Super Automatica Capper" with Tirage Bells. The standard bell supplied with the Super Automatica Capper is 26mm. This larger 31mm bell is compatible with slightly larger caps and bottle tops.
IMPORTANT: This bell is NOT compatible with the "Green Standard Bench Capper" OR "Lever Bench Capper" - due to different thread size.
-
$49.95Standard Bench Capper
Our standard bench capper provides an easy way to cap your beer bottles.
It is made from steel and with rubber grip pad so your bottles don't slip off the platform
This bottle capper can be used on different size bottles as the hight of the bell can be adjusted, and it can be bolted to sturdy surface.
Features:
- Easy to use and adjust to required heights depending on bottle size
- Comes with a standard bell which has a built in magnet to hold the bottle cap
- Simply place bottle caps in the bell then place the bottle underneath and pull the handle downThe capper is shipped flat-packed and needs assembling before use.
-
$20.50
