Equipment
-
Probe Seal Washer for Keg Coupler - D Type - No.4
Gas shut off probe (Keg Coupler Probe seal o-ring No.4)
Compatible with micromatic and all 'D and S' type keg couplers.
Dimensions 17MM OD X 10MM ID
-
Filter - 1 Micron Washable
1 Micron Washable Filter cartridge to fit 10 inch housing. Indestructible PE reinforced plastic shell to protect your filter from rupturing, or physical damage.
Most yeast will be filtered out with a 5 micron filter, while even more will be filtered out with a 3 micron filter.
A 1 micron filter removes most yeast at the High Efficiency rating. -
Beer / water Filter Housing
10 inch Beer or water Filter Housing for filtering your beer prior to bottling or kegging.
- High pressure housing
- Compatible with other 10" filter carbon cartridge and washable 1 micro beer filter. -
2 X Replacement Screens for - Bouncer Mac Daddy filter
Replacement screen assortment for Bouncer Mac Daddy Inline Filter. -
Replacement Screens X 2 for - Bouncer Classic
Replacement screen assortment for Classic Bouncer Inline Filter. Contains: - one standard 50-mesh screen (304 microns) - one 80-mesh screen for clearer beers (178 microns) -
Classic Bouncer Filter
The Bouncer Inline Beer Filter allows you to brew better tasting and clearer beer, with less waste, and without pumps or additives! Simply connect the filter between your racking cane and keg, or between your boil kettle and fermenter. -
Mac Daddy Bouncer Filter
It’s the Mac Daddy! Similar to the standard-sized Bouncer Inline Beer Filter - but BIGGER. The Mac Daddy Bouncer Filter allows you to brew better tasting and clearer beer, with less waste, and without pumps or additives! Simply connect the filter between your racking cane and keg, or between your boil kettle and fermenter.
-
Ss Sight Glass - Micro
A small sized sight glass for your brewing set up that has countless possible uses. -
Sight Glass - 1.5" Tri-clamp
While it is designed for use with conical fermenters it can be used in any setting with 1.5" tri-clamp fittings.
-
Hop Straining Bag (C163)
A reusable hop straining bag made from nylon mesh. Good for steeping hops or dry hopping, or for adding other things like oak chips to your brew. It's also easy to clean and sanitise.
Size: approx 125mm x 220mm
From: Krome DispenseOut of Stock