Beer Making

  1. Keg Coupler - D Type Stainless with PRV Keg Coupler - D Type Stainless with PRV
    $79.95

    Keg Coupler - D Type Stainless with PRV

    Keg Coupler - D Type (US Sankey) - with pressure relief valve and stainless steel body.

  2. Silicone Check Valve for A Type Coupler Silicone Check Valve for A Type Coupler
    $9.45

    Silicone Check Valve for A Type Coupler

    Silicone Check Valve for A Type CoupleraSilicone Check Valve for A Type Coupler.
    For the smaller type check valve see here

  3. Torpedo for D&S Type Coupler
    $8.80

    Torpedo for D&S Type Coupler

    Torpedo for standard D&S Type Couplers.

    Not compatible with Kegland D-Type Stainless (with Duotight Fittings)

  4. Ball Retainer Ring for D&S Type Coupler Ball Retainer Ring for D&S Type Coupler
    $5.00

    Ball Retainer Ring for D&S Type Coupler

    Ball Retainer and Ring for D&S Type Couplers
  5. SIlicone check Valve for D&S coupler SIlicone check Valve for D&S coupler
    $13.95

    SIlicone check Valve for D&S coupler

    SIlicone check Valve for D&S couplers.
    For the larger type check valve see here

  6. Probe Seal Washer for Keg Coupler - D Type - No.4 Probe Seal Washer for Keg Coupler - D Type - No.4
    $2.95

    Probe Seal Washer for Keg Coupler - D Type - No.4

    Gas shut off probe (Keg Coupler Probe seal o-ring No.4)

    Compatible with micromatic and all 'D and S' type keg couplers.

    Dimensions 17MM OD X 10MM ID

  7. D Type coupler O-ring (Body O-ring) No.5
    $3.95

    D Type coupler O-ring (Body O-ring) No.5

    'D and S' Type coupler O-ring (Body O-ring) No.5

    Normally purchased in increments of x 2. (body takes 2 o-rings)

  8. Keg Coupler - 90 Degrees D-Type Low Profile - C4999 Keg Coupler - 90 Degrees D-Type Low Profile - C4999
    $79.95

    Keg Coupler - 90 Degrees D-Type Low Profile - C4999

    Keg Coupler - D Type (US Sankey). This is a low profile coupler designed for situations where vertical space is limited.

    Includes a pressure relief valve (releases at 55 PSI).

  9. Keg Coupler - D-Type Stainless with Duotight Fittings Keg Coupler - D-Type Stainless with Duotight Fittings
    $69.95

    Keg Coupler - D-Type Stainless with Duotight Fittings

    D-Type Keg Coupler - Full 304 Stainless - with Duotight 5/8" to 8mm push fit fittings.

    Includes:
    1 x - D-Type Coupler with 5/8" Male Beer and Gas threads
    2 x - duotight 5/8" duotight to 8mm push in
    1 x - Non-Return Ball or Torpedo check piece (Non-Return Liquid)
    1 x - Gas Duck Bill valve (Non-Return Gas)

    Out of Stock
  10. STC-1000 Temperature Controller-Bare STC-1000 Temperature Controller-Bare
    $30.00

    STC-1000 Temperature Controller-Bare

    The STC-1000 is a temperature controller you can use to control your fermentation temperature. It has a hot and a cool circuit which you can use to heat and ferment your wort depending on the setting of your controller. This is a bare bones controller, and you need to assemble the controller yourself.

    The easiest way to do this is to buy two cheap extension leads which you can use for all wiring and plugs/sockets, and then assemble into any suitable housing such as a Systema box.

    There are lots of easy to follow wiring videos available on Youtube.

    Comes with a 1 meter long temperature probe.

    Model -110V - 220V AC