This product is not kept in stock in our shop but we can order them in for our customers. If you wish to find out more about this product, please contact us.

Ss Brewtech took what they'd learned designing and manufacturing pro brewing equipment and shrunk it down for the homebrewer with their new Brewmaster Edition Kettles.

This Brewmaster edition includes features such as a rotatable racking arm, and a sight glass integrated into the 3-piece ball valve to allow the brewer to monitor and minimise trub pickup during knockout. In addition, the all new dish bottom with integrated fire box is designed to increase surface area by 50% and channel the flow of heat for faster boiling times. It also includes a tangential inlet for more effective whirlpool action and trub collection. All tri-clamp fittings are fully sanitary welded, and built with the highest quality 304 stainless steel and craftsmanship available on the market today.

SS O-Ring replacements for Brew Buckets and Mini Brew Buckets.

For use on Brew Bucket 3/8" Ball Valve. Includes:
- 4 pcs 8.5 mm x 1 mm Buna N 70 O-rings
- 2 pcs 16mm x 1.8 mm Buna N 90 O-rings
- 6 pcs total in this set (enough to replace all o-rings on one Brew Bucket valve)

From: Ss Brewing Technologies, USA

The Hop Missile can be used either as a Hop Back or an Inline Hop Infuser. The difference being flushing your wort through the Hop Missile back into the boiler, or as a Hop Inline Infuser flushing the wort through the Hop Missile straight into your fermenter. Either way, you are going to have some serious fun getting a boost of aroma and flavour using this new method of hopping. For all you home hop growers, this is a must-have piece of kit to have to show off the best of your harvest.

This digital turbo boiler is a quality made 304 grade stainless steel turbo boiler.

A good alternative to the T500 boiler.

The 35Liter size is the total rated size brimful, so typically if you are using this as a beer boiler you would probably only fill it up to 25-30L so you had 5-10 litres of head space to boil comfortably.

The boiler has a quality made stainless tap with stainless barb and 1/2inch thread so you can attach the wide range of other half inch fittings such as camlocks and many other fittings that we can supply.

False Bottom for Ss Brewtech kettles 76L. These false bottoms feature a centre draw / drain and have all the fittings needed included in the box so they are plug and play with standard edition Ss Brewtech kettles. They also include a silicone gasket that seals off grain from getting around the edges of the false bottom.

Works with standard edition Ss Brew Kettles - not suitable for Brewmaster Kettles.

A tri-clamp, 1/2" ball valve

- perfect for Ss Brewmaster kettles, or any 1.5" tri-clamp fitting.
- 3-piece ball valve
- 304 Stainless Steel
- 1/2" ID valve body
- 1.5" tri-clamp on one side
- 1/2" threaded NPT (female) other side

Note: does not include tri-clamp gasket, clamp or hose barb.

A dial-type thermometer that is made for the SS Brewtech Brewmaster Kettles, although it could be used in any 1.5" tri-clamp situation. 

Thermometer:

• Dial Face: 3" -
• Tri-Clamp: 1.5"
• Range: -20-120 degrees C, 0-240 degrees F
• Accuracy: +/-1%
• Stem length: approx. 6cm (2.5")

Note: does not include tri-clamp gasket or clamp.