The Grainfather Fermentation Thermometer is a simple analogue thermometer that can easily be inserted into the Grainfather SF70 Thermowell to measure the temperature of the fermentation

It provides an accurate reading in both Celcius and Fahrenheit. 

This pretty handy kit contails all the seals needed for both the standard Nukatap and the Flow Control Nukatap.

The majority of these seals would never normally need to be replaced, but in the event of accidental loss / extreme commercial use please replace washers with the addition of food-grade lubricant to ensure their longevity.

If you have not changed your seals before, it's a great idea to take a note of which seal goes where as you remove the old ones!

Stainless Steel forward sealing Ultrataps to fit the latest Mangrove Jack's Kegerators, are now available individually. Note they can also be used on other homemade/custom kegerators or the like – as they are universal.
Comes with handle.

Note does not include shank.

The K-Lok adaptors/quick disconnects are compatible with Andale (Snaplok), Lancer Pacific (Fatlock), Bracton (B-Lock) and other brands of draft beer quick lock fittings that are often seen in commercial pubs and bars.

These fittings include the collet and they attach directly to the back of your tap so the tap fits directly into the K-Lok Female x 3/4 Male (Font Adaptor).

The K-Lok adaptors/quick disconnects are compatible with Andale (Snaplok), Lancer Pacific (Fatlock) and other brands of draft beer quick lock fittings that are often seen in commercial pubs and bars.

These are the font adaptors that are designed to fit any fonts with ¾ threaded font such as our Flooded Fonts.

These K-Lok couplers are designed to be a dry break so when you disconnect the male side the flow is cut off.

Includes: 

• 5 feet beer tubing
• 1 chrome plated tap
• 1 black tap handle
• 1 stainless column (3 inch) mounting hardware and gasket

The Ss Brewtech Inline Oxygenation Kit, designed to oxygenate wort during transfers to Brewmaster Chronicals and Unitanks.

• Fully welded oxygen stone, with all sanitary 1.5" tri-clamp connections
• 1.5" tri-clamp oxygen stone, 1.5" tri-clamp Micro Tee, and 1.5" tri-clamp Sight Glass
• (2) 1.5" tri-clamp clamps, and (2) 1.5" tri-clamp gaskets included
• 3/8" barbed oxygen inlet with ball valve to control flow
• All 304 stainless construction

This jacket will keep your FermZilla All Rounder 30L cool in summer and warm in winter. It can also be used with a heater belt to warm up the wort if the heat from the fermentation isn't enough. To control the temperature, we suggest using a MKII Programmable Temperature Controller.

This jacket also completely blocks any light/UV to prevent light struck or skunked beer.

A repair kit for the Krome stout tap.

Easily repair faucet leaks simply by replacing the gaskets used within. Refer to the secondary image to get a clear understanding of what goes where. It doesn’t need many tools for this job.