A stainless steel Tri-Clamp Cap with 3/8" Barb fitting.

Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak.

A tri-clamp cap with a 1/2" female NPT thread. Used to convert a male thread to a tri-clamp connection.

Tri-Clamp Size: 1.5" (3.81cm)
Made from: 304 Stainless Steel

From: Ss Brewtech

Lost or need to replace a camlock seal? Then purchase this 5 pack, so you can have some back ups up your sleeve! 

Material: Silicone 

Tri-Clamp Cap With 17mm Blow-Off Hole and Pressure Relief Valve

Note: Do not buy if you purchased a Brewmaster Edition Chronical fermenter as it comes standard.

- Size: 7.62cm (3")
- Material: 304 Stainless Steel
- Includes custom fabricated 1/2" stainless hose barb
- 17mm hole for 1/2" tubing
- Pressure relief valve included - 3" TC gasket not included

From: Ss Brewtech

1.5 inch Tri-Clover Elbow 90 Degree.

This sanitary tri-clamp elbow can be used for many brewery applications. They are welded sanitarily and made from food grade 304 grade stainless steel.

A 3 Way Ball Valve to 1/2" Threads (SS 304) - T Port Configuration.

This is a 304 Grade Stainless Steel 3 Way Ball Valve all 1/2" BSP Female. Please refer to the pictures for a more detailed description of what a T Port configuration means. 

A stainless steel hose barb fitting - 1/2" female BSP thread with a barb on the other end.

Usually available with barb sizes:
- 3/8"
- 13mm

A 5/8" Stainless Ball Valve (Female x Male) for keg couplers or shanks.

This ball valve is incredibly handy for those wanting to control the shut off flow of liquid and gas lines on keg couplers or shanks that have a 5/8" thread. Highly recommended if you are disconnecting your coupler and not re-attaching to another keg immediately.

Tri-Clamp Cap that allows you to connect with swivel nuts and other MFL fittlings.

• 1.5" tri-clamp to 1/4" Male Threaded Flare Fitting
• 304 Stainless Construction
• Keg Directly from a Brite Tank
• Serve Directly from a Brite Tank