Beer Making

  1. Filter - 1 Micron Washable Filter - 1 Micron Washable
    $19.95

    Filter - 1 Micron Washable

    1 Micron Washable Filter cartridge to fit 10 inch housing. Indestructible PE reinforced plastic shell to protect your filter from rupturing, or physical damage.

    Most yeast will be filtered out with a 5 micron filter, while even more will be filtered out with a 3 micron filter.
    A 1 micron filter removes most yeast at the High Efficiency rating.

  2. The League "Ich bin ein Berliner" - Berliner Weisse
    $38.50

    The League "Ich bin ein Berliner" - Berliner Weisse

    1 Review(s)

    This recipe was not specifically designed to be consistent with the BJCP style guides, but we believe it is similar to 23A - European Sour Ale.

    This is a great summer beer for those folks that'd like to have a tasty low ABV thirst quencher on tap. Targeting 3% ABV, easy to brew by avoiding kettle sour using the fantastic Philly Sour Yeast. Using Citra gives this beer a delicious citrus nose.

    This German/American collaboration is a winner!

    Our kits are fresh! We assemble the ingredients after you place your order. The grain bill will be milled, unless you tell us in your order comments that you prefer it not to be.

    This recipe has been designed to use acid malt to reach the target mash pH. If you wish to use the recommended mineral additions to achieve the intended flavour profile, these are to be added to the boil only. This kit does not include the minerals, but these can be purchased separately.


    Click here to download the recipe.

    Click here to download the BeerXML file (to directly import into your favorite brewing software)

  3. The League "Cemetery Sunset" - Boysenberry Gose Recipe Kit (All Grain)
    $46.50

    The League "Cemetery Sunset" - Boysenberry Gose Recipe Kit (All Grain)

    This recipe uses some ingredients that are not included and must be sourced locally - frozen boysenberries (or another red berry), non-ionised salt and coriander seeds. See the recipe for details.

    Cemetery Sunset - Boysenberry Gose is a recipe designed for The League of Brewers by Jamie McQuillan of Cell Division Brewery.

    As an advocate of mixed ferment sour beers over and above kettle souring, Jamie put this recipe together as an alternative for brewers fearful of introducing live souring lactobacillus bacteria into their brewery. It has a simple grain bill of pilsner malt and wheat malt, a sprinkling of herbaceous Saaz hops, salt and coriander. The driving force behind this unique take on a Gose is Lallemand’s WildBrew Philly Sour™ yeast. The yeast is a unique species (Lachancea) which produces lactic acid during the ferment. It was isolated from a cemetery of all places!

    Careful adherence to the fermentation instructions will yield a delicious low abv (4.8%) sour beer with red apple and stone fruit notes. Further refermentation on boysenberries will add a wonderful blood red (cemetery sunset) colour, a big, juicy fruit flavour and additional acidity. Pucker up!

    ABV: 4.8%

  4. 1/2" Inch BSP 316 stainless Hex Nipple
    $8.10

    1/2" Inch BSP 316 stainless Hex Nipple

    Used for connecting ball valves to weld-less vessels.
  5. 1/2" Inch BSP 316 stainless hex Back Nut
    $6.10

    1/2" Inch BSP 316 stainless hex Back Nut

    Used in conjunction with a hex nipple, washer and ball valve assembly.
    Out of Stock
  6. 22MM Stainless steel Flat Washer
    $2.50

    22MM Stainless steel Flat Washer

    Good for hex nipples, and putting pressure on seals.

  7. Teflon Thread Seal Tape
    $4.00

    Teflon Thread Seal Tape

    Teflon PTFE Thread Seal Tape for sealing threaded joints.

    Size: 12mm wide x 10m
    Colour: Yellow

    Nobody likes leaky fittings in the brewhouse - a little bit of teflon thread tape can make all the difference.
  8. 1.5” Tri-Clamp cap with 3/8" barb 1.5” Tri-Clamp cap with 3/8
    $19.95

    1.5” Tri-Clamp cap with 3/8" barb

    A stainless steel Tri-Clamp Cap with 3/8" Barb fitting.

    Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak.

    Out of Stock
  9. Tri-Clamp Cap with 1/2" Female NPT Tri-Clamp Cap with 1/2
    $20.00

    Tri-Clamp Cap with 1/2" Female NPT

    A tri-clamp cap with a 1/2" female NPT thread. Used to convert a male thread to a tri-clamp connection.

    Tri-Clamp Size: 1.5" (3.81cm)
    Made from: 304 Stainless Steel

    From: Ss Brewtech

  10. Camlock Replacement Silicone Seal (5 Pack)
    $5.00

    Camlock Replacement Silicone Seal (5 Pack)

    Lost or need to replace a camlock seal? Then purchase this 5 pack, so you can have some back ups up your sleeve! 

    Material: Silicone