74g CO2 Cartridge | The Big Bulb | (5/8-18UNF Thread).

This CO2 Cartridge has a much larger thread than the standard 16g bulbs. It will require a different bushing if you are to use it with the 360 Core Mini Regulator. It does not suit other regulators in the KegLand range.

Traditional analogue gauges require a small capillary mechanism where a small pipe expands and unravels under pressure. This in turn drives a mechanical cog to rotate the gauge needle.  This age old technique works quite well especially in large gauges but as this mechanism is manufactured smaller and smaller a tradeoff between accuracy and size becomes the issue.  With very small gauges such as a 27mm x 27mm Mini Gauge it's difficult to make them better than 10% accuracy due to the physical constraints of the mechanical components.

A gas distributor for splitting your CO2 gas line into multiple outlets, with MFL connections. Options for two, three, and four outlets.

Connect just one cylinder to this gas distributor inlet and dispense from many beer kegs – all at the same time. You get the same pressure at all outlet points.

Stainless Steel 304 Wall Mounting Brackets and Screws Included.

Type 30 - MK5 CO2 Regulator - Tool-Free - Dual Gauge (4.5bar PRV & 65psi Gauge)

The MK5 Dual Gauge Regulator by KegLand now comes in a tool-free design with a heap of new features.

Worn down your washers and seals from filling oodles of sodastream bottles? Then you may want to purchase some extra washers and o-rings

Premium Plus Micromatic, dual guage CO2 Regulator for your kegging system. This high quality regulator will allow constant pressure supply at high output flow rates. Now comes with adjustment knob to alter the pressure, or use the allen key provided.

This is a bulk product - one unit equals 1 meter.

Clear 6mm ID Ledavin PVC tubing perfect for gas or beer line. Capable of fitting a standard disconnect barb, not suitable for push in fittings (without a barb to tube adapter).

We recommend using the 4mm ID version of this where you want the line as short as possible (kegerators, fridge mounted taps etc). This makes a great gas line or when you need to bridge longer distances from keg to tap.

Outer diameter = 10mm

The Precision Plus CO2 Regulator is the perfect choice for ensuring precise and consistent control over your CO2 levels in your beverage dispensing system. With a sleek chrome-plated finish, this regulator not only performs exceptionally but also adds a touch of elegance to your setup. Designed with a robust construction and advanced features, it guarantees reliability and durability for both commercial and home use.