Grizzly American Brown is a recipe designed for The League of Brewers by Jamie McQuillan of Cell Division Brewery.

This beer was created to push the upper limits of the American Brown Ale style and verges on a Brown IPA. It pours a deep, dark brown colour without any harsh roasted notes and displays a lasting tan head. Soft and rounded toasty chocolate notes give way to a firm balancing bitterness and lingering resinous grapefruit and pine, thanks to generous additions of Centennial and Simcoe hops. At an easy drinking abv of 6.3%, this beer you will leave you with nothing to grizzle about.

ABV: 6.3%

This recipe has been designed to be consistent with the 2021 BJCP Style guide 13A: Dark Mild.

Britannia is a recipe created for The League of Brewers by Jamie McQuillan of Cell Division Brewery.

Originating in the United Kingdom, Milds have a long history and have changed a great deal with the passing of time. The Dark Milds of today are a style with a wide scope of interpretation, ranging in colour from copper to deep brown in colour.  They are a great low alcohol British-style session ale that pack a flavour punch well above their abv.

Britannia pours a deep copper colour, with soft notes of caramel, chocolate and roasted coffee on the nose and palate. A medium body and smooth mouthfeel are well suited to low to medium levels of carbonation, especially on hand pull as is traditional for this style.  English grown Target hops provide a supporting bitterness and undertones of earthy and floral flavours. Thirst inducing, thirst quenching!

A CO2 Gas Cylinder Holder for securing one cylinder.

Simply mount onto the wall or similar (screws not included) and use the chain to wrap around the cylinder.

Need to set two different CO2 pressures for different beers on tap? Then you'll need two regulators to do it properly. With this MK4 Dual Pressure Regulator you'll be able to screw it into your CO2 bottle and fire away with two different pressures. No need to removing the High Pressure gauge off one regulator, buying an attachment and joining the two together.

See - Single CO2 Regulator - MK4 for the single version of this regulator.

Unlike our cheaper sodastream cylinder adaptors, this adapter has the added advantage that you can use the side thumb screw to depress the pin in the middle of the adaptor.  This pin adjustment makes the sodastream cylinder adaptor significantly easier to use.

This easy to use SodaStream Cylinder Filling Adaptor will enable you to fill your own CO2 from your larger bulk cylinder into smaller SodaStream cylinders. An easy and inexpensive way to fill your own Sodastream Cylinders at home at a fraction of the cost of getting the refills from your local store.

See this video for full instructions: https://www.youtube.com/watch?v=MeopdQRJPTA

A stainless steel gauge guard for MK4 regulators (Bump Guard).

Are you like us and bump and push in your kegerator too hard up against the wall with the gas bottle on the back, maybe you've broken a dial in the process of dropping or transporting your gas bottle with the regulator attached. Or perhaps you're in a busy cafe/bar and someone needs to change over the tank and they drop the regulator, smashing the dial. That's money wasted and time spent without whats on tap. If you're like us then you need our tough stainless steel regulator bump, bash, smash and drop (within reason) guard protector. Designed and built by those who are tired of replacing gauge and getting refills for a simple accident.

Unlike most Gauge Guards/Gauge Cages this particular design is made completely from one piece of 304 stainless steel so it won't rust over time.

These can be used with any kegerator as they are compatible with gas bottles with a standard thread. To use it with the new kegerators, you just need to remove the hose barb.