Upgrade your FermZilla All Rounder or Tri-Conical fermenter with the new 2 Inch Tri-Clover Lid from Kegland. Add yeast, hops or even take samples from a wine thief from the top and not have to remove the entire lid.

This particular lid was designed in order to suit a growing number of customers dry hopping without exposing the batch to oxygen from opening the lid. By using this lid in conjunction with the FermZilla 2" Butterfly Valve and Hop Bong Kit, you would be able to purge CO2 into the tube and expel all the oxygen around it and dump freely into the vessel.

Named purely on its looks and not its function. The Hop Bong is a versatile pressurisable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters but also as an inline carbonation/oxygenation accessory.

This is an upgrade kit for existing FermZilla Tri-Conical and All Rounder fermenters. Only compatible with the 2" Tri-Clamp Adapted Pressure Lid.

Compatible with any 2 Inch tri-clamp fitting. Primarily designed for the:
- FermZilla 2" Tri-Clamp Lid
- in conjunction with the 2" Tri-Clamp Hop Bong

If you are looking to put your FermZilla Tri-Conical / All Rounder in a Fermentation Chamber / Fridge, you will want to allow 420mm measured from the base of the ring collar to a comfortable level to pull the pressure relief valve to purge oxygen from the hop bong.

This black HDPE lid has been designed to be chemically resistant but also strong enough to hold up to 2.5bar pressure.

This lid can screw onto the top of your Fermzilla Collection Container and this allows you to use the Fermzilla collection contianer for other stainless fermenters with a 2 inch tri-clamp dump valve.

Note: clamp and container not included.

BrewZilla Gen 4 Neoprene Jacket / Parka with Recirculation Arm Cover

New and improved BrewZilla Gen 4 Neoprene Jacket for more stable mash temperatures and heat retention. Now made with 8mm thick neoprene, improved recirculation pipe insulation on both the boiler and the recirculation camlock arm.

If you brew outside where it is cold or windy, the Neoprene Jacket/Parka is a must-buy! Don't lose that heat to the atmosphere!

Available for both 35L and 65L Brewzilla Gen 4 units.

This handy little device enables you to add clarifier / finings to your beer that is in a pressurised fermenter. You can add your claifier / finings to your beer with no exposure to oxygen whilst still under pressure.

Get the exact tension you need with your BrewZilla, DigiBoil or even GrainFather with Kegland's Stainless Steel Adjustable Clamp Set. Adjust to your specification.

This set of 4 adjustable stainless steel clamp set suits the 35L and 65L BrewZilla Gen 3 all the way to Gen 4 as well as all 35L and 65L DigiBoils. It also suits the 12L and 24L Boiler Extensions.

This high alpha variety was bred in 1980 at Hüll Hop Research Center in Germany and is known for its extremely large and heavy cones. Aromas of lemon, green pepper, spearmint and apple.