Beer Making
-
Funnel Set of 4 (5,7,10 & 12cm)
Set of 4 funnels. Sizes are (5,7,10 & 12cm)
Perfect for all those odd sizes vessels.
-
Hop Boiling Bag (30cm x 10cm)
Hop Boiling bag for use in all-grain, partial mash beer making or dry hopping. Great for the easy removal of leaf or hop pellets. Sterilise before use and once filled with hops, tie a knot in the bag high enough to allow the hops to move around freely during the boil or at the end of fermentation if dry hopping.
-
Replacement Gaskets for Classic Bouncer (pack of 5)
Replacement gaskets for the Classic Bouncer Filter. Pack of 5. -
Replacement Gaskets Bouncer Pro (pack of 5)
Replacement gaskets for the Bouncer Pro Filter. Pack of 5. -
Easy Siphon mini - 350mm
A 350mm long Easy syphon perfect for automated siphoning. Long enough to use in a 5L carboys or for siphoning out of a 10L brewing bucket.
Compatible with the 7.9mm siphon hose which is sold separately. We recommend 1.5M in length. -
Easy Siphon 580mm
A 580mm Easi-syphon, perfect for automated siphoning. Long enough to use in a 23L PET carbouys or for siphoning out of a 30L brewing bucket.
Compatible with the 7.9mm siphon hose which is sold separately. -
Racking Cane Holder 3/8"
Racking Cane Holder to help hold your siphon or racking cane. Clips onto the side of plastic fermenters or to the neck of any carboy. Hose clip is 3/8" (0.925cm).
Turns a job that sometimes needs three hands into one that only needs two. -
Plastic siphon tube / hose 7.9MM ID - per metre
This is a bulk product - one unit equals 1 meter.
This hosing is 7.9mm inside diameter and is great for siphoning beer from one vessel to another. It is available in any length up to 25m. It is made of clear, non-toxic plastic and is suitable for contact with any food-grade liquid.
Not recommended as a beer line that holds beer over long periods of time. We recommend Ledavin as a beer line instead. -
Ledathene Natural Tube hose 6mm OD x 3mm ID
This is a bulk product - one unit equals 1 meter.
1/4" Valpar Natural Tube, suitable for gas or beer line in your kegging set-up. This is stiff material and can be used for push in fittings.