Equipment

  1. 500ml Glass Trial Jar
    $19.50

    500ml Glass Trial Jar

    Ideal for measuring up to 500ml in volume. Approximately 30cm tall.
  2. HALO Wireless pH meter HALO Wireless pH meter
    $459.95

    HALO Wireless pH meter

    Easily measure pH in mash, wort, and finished beer with the FC2142 Wireless Beer pH Meter. This HALO is designed for home and craft beer makers. The specialised electrode features a durable titanium body, high temperature glass sensor, and an extendable cloth type junction for renewable electrode life. All readings are transmitted directly to your Apple or Android device or the edge®blu.

    Out of Stock
  3. Buffer Powders - 3 kinds per bag Buffer Powders - 3 kinds per bag
    $6.00

    Buffer Powders - 3 kinds per bag

    pH Buffer Solution - 3 Pack (4.00 / 6.86 / 9.18)


    In order to keep your PH meter as accurate as possible, you will need to calibrate using our three buffer solutions. 
    We would strongly recommend if you haven't used your ph meter in a while to always use a buffer solution before you start your brew.
    If you do not have anyStorage Solution, we would also highly recommend you use this solution for storage after every use.
    Directions for use:
    1. Completely empty the powder into a clean 250mL glass beaker.
    2. Add 250mL of deinoized water to the beaker.
    3. Stir until the powder has completely dissolved.


    pH solution is accurate to (-+) 0.01pH

  4. Digital Kitchen Scales up to 10kg (+-3g) Digital Kitchen Scales up to 10kg (+-3g)
    $19.00

    Digital Kitchen Scales up to 10kg (+-3g)

    These digital scales are ideal for accurately measuring:
    - Hops
    - Specialty Malt
    - Yeast Starters
    - Cleaning Powders
    - Disposable Cylinders
    - Most items up to 10kg

    It is not suitable for weighing under 5g accurately.

    Out of Stock
  5. Fill-O-Meter - Volumetric Water Measuring Device Fill-O-Meter - Volumetric Water Measuring Device
    $134.95

    Fill-O-Meter - Volumetric Water Measuring Device

    A must have bit of kit for any homebrewer. Don't waste time next to the hose, punch in what you need and concern yourself with other parts of the brew day. It is the KegLand way!


    The perfect present for any homebrewer of any skill level, we all need water to brew.


  6. pH Meter - Checker Plus
    $114.95

    pH Meter - Checker Plus

    A pH tester from Hanna Instruments that is simple to use and operate. The one-button operation and large display makes it easy for anyone to test pH at home or in the lab. 

    Out of Stock
  7. Thermometer - Thermistor Thermometer - Thermistor
    $199.95

    Thermometer - Thermistor

    Thermistor Thermometer from Hanna Instruments. Designed with user functionality and performance in mind, the HI93501 is a waterproof thermistor thermometer that measures temperature from -50.0 to 150.0°C. The included batteries provide up to 4500 hours of continuous use. CAL Check™ and the Battery Error Prevention System (BEPS) ensure the highest level of accuracy and confidence. The probe is replaceable and works with an assortment of specialised probes.

     

    Out of Stock
  8. Quick Disconnect - Male with 8mm Barb Quick Disconnect - Male with 8mm Barb
    $9.00

    Quick Disconnect - Male with 8mm Barb

    Stainless Steel Quick Disconnect - Male to 8mm barb.
  9. 1.5” Tri-Clamp cap with 1/2” BSP male
    $14.95

    1.5” Tri-Clamp cap with 1/2” BSP male

    1.5” Tri-Clamp cap with 1/2” BSP male.

    Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak.
  10. 12.7mm Stainless Steel Compression Fitting 1/2” BSP 12.7mm Stainless Steel Compression Fitting 1/2” BSP
    $10.00

    12.7mm Stainless Steel Compression Fitting 1/2” BSP

    A 12.7mm compression fitting with 1/2" BSP thread.

    These compression fittings are commonly used with immersion chillers to quickly disconnect the liquid hosing for storage and ease of cleaning.