Equipment
-
$3.00pH 7.00 Buffer Solution Powder for pH Meter
pH Buffer powder 7.00 to use for calibration of pH meters. Designed to be used with R.O water at 25 degrees celcius. Add contents to 250ml of water until dissolved.Out of Stock -
$3.00
pH 4.01 Buffer Solution Powder for pH Meter
pH Buffer powder 4.01 to use for calibration of pH meters. Designed to be used with R.O water at 25 degrees celcius. Add contents to 250ml of water until dissolved.Out of Stock -
$3.00pH 10.01 Buffer Solution Powder for pH Meter
pH Buffer powder 10.01 to use for calibration of pH meters. Designed to be used with R.O water at 25 degrees celcius. Add contents to 250ml of water until dissolved.Out of Stock -
$3.00
pH 9.18 Buffer Solution Powder for pH Meter
pH Buffer powder 9.18 to use for calibration of pH meters. Designed to be used with R.O water at 25 degrees celcius. Add contents to 250ml of water until dissolved.Out of Stock -
$3.00
pH 6.86 Buffer Solution Powder for pH Meter
pH Buffer powder 6.86 to use for calibration of pH meters. Designed to be used with R.O water at 25 degrees celcius. Add contents to 250ml of water until dissolved.Out of Stock -
$8.70Glass Thermometer - Short - 15cm
Reads 0 -100
Contains no mercury
For use with the Euro 5 and MK5E stills
-
$25.00pH meter Replacement electrode / Probe
Replacement electrode / Probe for your pen style pH meter. Compatible with the Beverage Doctor pH meter.Out of Stock -
$17.00Alcometer
Alcometer with 0-100% and Proof scales, with instructions. It is not recommended for testing beer, wine or liqueurs as it is most reliable when measuring the alcohol content of liquids with a higher percentage alcohol.
Calibrated to 20 degrees C.Out of Stock -
$39.95Dial thermometer with 42mm probe and weldless Kit
A bi-metal weldless thermometer with 3" stainless steel housing, hermetically sealed in a water proof case with glass face. Ideal for fitting to your mash tun, hot liquor tank or kettle. Provides temperature readout in both Fahrenheit and Celsius. The thermometer kit include 1 x stainless washer, 1 x 1/2"NPT/BSP Lock Nut, 2 x Silicone O-rings. Requires a 7/8" drill bit to install. To prevent leaking, wrap the 1/2" BSP threads with Teflon tape prior to threading into the port. -
$2.95Stick-on Thermometer strip
Stick-on Thermometer strip graded from 10 degrees C to 40 degrees C. Can be stuck to the outside of any fermenter to give an indication of the temperature of the liquid inside.
We find these are quite reliable but it is always a good idea to test the calibration of any thermometer from time to time. For these stick-on versions, we recommend doing this especially as it gets older or if it is exposed to excessive heat such as hot cleaning water.
