False Bottom for Ss Brewtech kettles 76L. These false bottoms feature a centre draw / drain and have all the fittings needed included in the box so they are plug and play with standard edition Ss Brewtech kettles. They also include a silicone gasket that seals off grain from getting around the edges of the false bottom.

Works with standard edition Ss Brew Kettles - not suitable for Brewmaster Kettles.

This digital turbo boiler is a quality made 304 grade stainless steel turbo boiler.

A good alternative to the T500 boiler.

The 35Liter size is the total rated size brimful, so typically if you are using this as a beer boiler you would probably only fill it up to 25-30L so you had 5-10 litres of head space to boil comfortably.

The boiler has a quality made stainless tap with stainless barb and 1/2inch thread so you can attach the wide range of other half inch fittings such as camlocks and many other fittings that we can supply.

SS O-Ring replacements for Brew Buckets and Mini Brew Buckets.

For use on Brew Bucket 3/8" Ball Valve. Includes:
- 4 pcs 8.5 mm x 1 mm Buna N 70 O-rings
- 2 pcs 16mm x 1.8 mm Buna N 90 O-rings
- 6 pcs total in this set (enough to replace all o-rings on one Brew Bucket valve)

From: Ss Brewing Technologies, USA

The Hop Missile can be used either as a Hop Back or an Inline Hop Infuser. The difference being flushing your wort through the Hop Missile back into the boiler, or as a Hop Inline Infuser flushing the wort through the Hop Missile straight into your fermenter. Either way, you are going to have some serious fun getting a boost of aroma and flavour using this new method of hopping. For all you home hop growers, this is a must-have piece of kit to have to show off the best of your harvest.

Specifications:

• Capable of pressures up to 40psi
• 85g Capacity of Whole Cones / Flowers when used as a Hop Back
• 115g Capacity of Whole Cones / Flowers when used as an Inline Hop Infuser
• 100% 304 SS construction with heat tolerant and food-grade silicone seals
• Fully enclosed system allows for easy no low maintenance monitoring on brew day

We recommend using camlocks on the inlet and outlet. More specifically Female 1/2" BSP to Male Camlock (Type A).

Other uses:

This Hop Missile can also be used as an Inline filter to filter out a fair chunk of the hop material to the fermenter. Fill the unit with 80g worth of Oat or Rice Hulls and fire away! Please Note: When using pellet hops, or if you have a large amount of trub and debris it may compact and impede the flow of the Hop Missile. To help prevent this, installing a pre-filter in your pot is recommended to prevent excessive quantities of material from entering the hopback. We also highly recommend using oat or rice hulls in combination with hop pellets to aid in wort passing through the Hop Missile.

Demijohn Solid Bung 28mm-30mm (23L Jar) (28mm to 32mm)

Fits 23l glass carboys and 5L flip top demijohns.