Equipment
-
$9.95MFL keg connector - Gas
Gas (grey or white) connector with MFL thread for ball lock corny kegs.
This is a premium plastic ball lock connector, with a two year warranty. These high quality plastic disconnects are designed with the highest tolerances and quality control standards. These can be easily distinguished by the two toned cap on top of the disconnect.
From: Kegland -
$22.50Keg connector - Stainless – liquid - 6mm Barb
A stainless steel liquid ball lock disconnect, with a 6mm barb. Extremely robust and reliable.
Includes a black plastic marker strip to help differentiate from the equivalent gas version, which has a grey plastic marker strip. -
$22.50Keg connector - stainless - gas - 6mm Barb
A stainless steel gas ball lock disconnect, with a 6mm barb. Extremely robust and reliable.
Includes a grey plastic marker strip to help differentiate from the equivalent liquid version, which has a black plastic marker strip.Out of Stock -
$10.00Keg connector - liquid - 6mm barb
A plastic beer ball-lock disconnect with a barbed fitting for your beer line. CMB quality. Stainless steel and MFL versions are available.
For beer line we recommend using 4mm Ledavin, commercial grade beer line with a 4mm internal diameter. This means that you can have much shorter beer lines with much less beer being held static in the line inbetween pours. -
$10.00Keg connector - gas - 6mm barb
A plastic gas ball-lock disconnect with a 6mm barbed fitting for your gas line. CMB quality. Stainless steel and MFL versions are available.
For gas line we recommend using 6mm Ledavin, commercial grade gas line with a 6mm internal diameter, which is easy to fit over the standard 6mm barb. -
$69.95Keg Coupler - D-Type Stainless with Duotight Fittings
D-Type Keg Coupler - Full Stainless - with Duotight 5/8" to 8mm push fit fittings.
Includes:
1 x - D-Type Coupler with 5/8" Male Beer and Gas threads
2 x - duotight 5/8" duotight to 8mm push in
1 x - Non-Return Ball or Torpedo check piece (Non-Return Liquid)
1 x - Gas Duck Bill valve (Non-Return Gas) -
$79.95Keg Coupler - 90 Degrees D-Type Low Profile - C4999
Keg Coupler - D Type (US Sankey). This is a low profile coupler designed for situations where vertical space is limited.
Includes a pressure relief valve (releases at 55 PSI).
-
$3.95D Type coupler O-ring (Body O-ring) No.5
'D and S' Type coupler O-ring (Body O-ring) No.5
Normally purchased in increments of x 2. (body takes 2 o-rings)
-
$2.95Probe Seal Washer for Keg Coupler - D Type - No.4
Gas shut off probe (Keg Coupler Probe seal o-ring No.4)
Compatible with micromatic and all 'D and S' type keg couplers.
Dimensions 17MM OD X 10MM ID
-
$30.00STC-1000 Temperature Controller-Bare
The STC-1000 is a temperature controller you can use to control your fermentation temperature. It has a hot and a cool circuit which you can use to heat and ferment your wort depending on the setting of your controller. This is a bare bones controller, and you need to assemble the controller yourself.
The easiest way to do this is to buy two cheap extension leads which you can use for all wiring and plugs/sockets, and then assemble into any suitable housing such as a Systema box.
There are lots of easy to follow wiring videos available on Youtube.
Comes with a 1 meter long temperature probe.
Model -240V
