Equipment
-
$121.95Mangrove Jack's Dual Gauge CO2 Regulator
These can be used with any kegerator as they are compatible with gas bottles with a standard thread. To use it with the new kegerators, you just need to remove the hose barb.
-
$84.95Nitrogen Regulator - MK4
The Type 50 for Nitrogen - MK4 Dual Gauge gas regulator is the only regulator you'll ever need to buy for a deluxe nitrogen stout/cocktail setup. With a large body and precision diaphragm, this regulator provides high flow rates and very accurate adjustments in both PSI and KPA.
-
$18.95Drip Tray - Plastic 30cm
A plastic drip tray for your beer taps with removable grill.
Material: Food Grade Polycarbonate
Colour: Black
Dimensions: approx. 30cm x 16cm
From: Krome DispenseOut of Stock -
$19.95Hop Tube - Stainless Steel with Chain
This Hop Tube is made from 304 stainless steel and is ideal for addling larger amounts of hop pellets, flowers or spices to your RoboBrew / BrewZilla without blocking the pump. It can also be used in your Brewhouse Kettle/Boiler, 19L corny keg, and the FermZilla. It cannot fit in a standard 50L Keg as the opening is not wide enough. The fine mesh will prevent large particles from blocking the dip tube, pumps or chillers. It will hold approximately 150g of hop pellets, allowing for some space to permit full extraction of the hop oils. Ideal for dry hopping in the keg and can also be used for fruits, wood chips, spices and more. Includes a small ring so it can be hung from the keg lid or side of the vessel.
Diameter: approx. 66mm Heigh: approx. 300 mm.
-
$54.95Kegerator Cover - Water Resistant (for Series 4 and X Kegerators)
The Kegarator Cover is an ideal solution for storing your Kegerator outside or exposed to water/dust or dirt. Keep your Kegerator in the best condition you can.
Suitable for all Series 4 and Series X tap configurations.
-
$19.00Gas Ball Lock Post with 5/8" Thread for keg coupler
Gas Ball Lock Post with 5/8" Thread. These are a very popular accessory that allows you to convert a commercial keg coupler with 5/8" thread to a standard corny disconnect gas post. This is the simplest way to allow you to serve beer from commercial kegs in a standard homebrew kegerator or keezer without modifying your beer and gas lines.
-
$20.00Liquid Ball Lock Post with 5/8 Thread for keg coupler
Liquid Ball Lock Post with 5/8" Thread. These are a very popular accessory that allows you to convert a commercial keg coupler with 5/8" thread to a standard corny disconnect liquid post. This is the simplest way to allow you to serve beer from commercial kegs in a standard homebrew kegerator or keezer without modifying your beer and gas lines.
-
$20.00Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly
These ball lock posts include a 1/4 inch BSP thread so you can attach it to a wide range of other fittings.
The posts include a 20mm long thread, an o-ring, poppet, locking nut and short dip tube. This would enable you to make a keg out of any pressure vessel if you wanted to. The assembly can also be fitted to regulators, gas manifolds and various other items.
Both Gas and Liquid posts available.
From: KeglandOut of Stock -
$2.95 -
$4.95Faucet And Shank Cleaning Brush
Double sided Faucet and shank cleaning brush for maintaining your beer taps and dispensing system.
