Equipment
-
$16.95Gas Free Ball Lock - PET Party Pump Combo - PCO1881
Are you ever in a situation where you don't want to unhook your gas line from your kegs, or have ball lock disconnects that you need to clean over at the sink but don't want to take your gas line all the way over there? Well, Kegland thought of a better way. Why not fill a PET Bottle with your cleaner / sanitiser and pump it without gas!
This little device can also be used as a mini party keg without a gas source (should be consumed well within 24 hours of pumping). BYO Liquid disconnect, hose and picnic tap.Out of Stock -
$15.50PRV Fitting for Kegging
Pressure Relief Valve (PRV) fitting for connecting onto a gas post so that you can release pressure while controlling the fill speed when transferring beer from one vessel to another.
-
$4.95Duotight - 6.35mm x 8mm Reducer
No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collect and the hose can be removed.
These push in fittings are suitable to be used up to 100 psi.
No clamps Necessary!
-
$4.003/4" threaded barrel bung for plastic fermenters / cubes PC4904
3/4" threaded barrel bung for plastic fermenters / cubesOut of Stock -
$190.00Plate Chiller MKIII Chillout – 30 Plates
The Chillout MKIII is the fastest way to chill your wort to yeast pitching temperature to get your fermentation off to a quick healthy start.
The Chillout is made from stainless steel and brazed together with pure copper. It also has ripples up and down each plate. This creates more surface area and improves heat transfer. -
$99.95Copper Immersion Wort Chiller – 7.5m length
Copper Immersion Wort Chiller – 7.5m length
Immersion chillers are the easiest to use and clean chillers for all grain brewers. Just drop it into your hot wort and turn on the water. Occasional stirring or recirculating with a pump will reduce cooling times considerably.Outer diameter of the copper tube is 10mm. The total diameter of the coil is approximately 250mm.
Out of Stock -
$99.95Stainless Steel Immersion Wort Chiller – 7.5m length
Stainless Steel Immersion Wort Chiller – 7.5m length
Immersion chillers are the easiest to use and clean chillers for all grain brewers. Just drop it into your hot wort and turn on the water. Occasional stirring or recirculating with a pump will reduce cooling times considerably.Outer diameter of the stainless steel tube is 10mm. The total diameter of the coil is approximately 250mm.
Out of Stock -
$2.70Grainfather GC2 Air Filter
Replacement air filter for the Grainfather GC2 Glycol Chiller. Not compatible with the GC4 Glycol Chiller.
-
$80.95S40 Immersion Chiller
Stainless steel Immersion Chiller for any 40- 50L Brewing System.
Dimensions 370MM W X 230MM H X 380MM arm height.
Coil diameter - 9.5mm OD
-
$329.95Coolossus 2.1 - Stainless Steel Counter Flow Chiller
Coolossus Gen2 - Passivated Stainless Steel Counter Flow Chiller with 1.5" Tri Clover Wort Lines - 1/2" Water Line ( 9.5m Long)
Chill your wort down like a pro with professional 1.5" Tri Clover fittings! Unlike plate chillers that utilise copper's great conductivity, this 6.5m fully 304 passivated stainless steel chiller can withstand high hop additions without clogging.
The Coolossus also has high chemical resistance unlike plate chillers and other copper immersion chillers.
NEW Gen 2.1 Upgrade: 3mm Steel plate with three 4mm mounting holes.
