Compatible with any 2 Inch tri-clamp fitting. Primarily designed for the:
- FermZilla 2" Tri-Clamp Lid
- in conjunction with the 2" Tri-Clamp Hop Bong

If you are looking to put your FermZilla Tri-Conical / All Rounder in a Fermentation Chamber / Fridge, you will want to allow 420mm measured from the base of the ring collar to a comfortable level to pull the pressure relief valve to purge oxygen from the hop bong.

This black HDPE lid has been designed to be chemically resistant but also strong enough to hold up to 2.5bar pressure.

This lid can screw onto the top of your Fermzilla Collection Container and this allows you to use the Fermzilla collection contianer for other stainless fermenters with a 2 inch tri-clamp dump valve.

Note: clamp and container not included.

Yay, finally a wider mouth demijohn that will take our easy siphons!

You can get the Stopper without Hole or the Stopper with Hole to fit this demijohn.

Please note these demijohns come with a screw top lid rather than a swing top. The swing tops are not compatible with this demijohn.

Neck internal diameter 40mm

This handy little device enables you to add clarifier / finings to your beer that is in a pressurised fermenter. You can add your claifier / finings to your beer with no exposure to oxygen whilst still under pressure.

10L food grade bucket with tamper proof lid.

Perfect for storing grain or other dry ingredients.
Can be used as a fermenter (would need to drill lid hole)
Also handy for cleaning and sanitising other equipment.

20L food grade bucket with tamper proof lid.

Perfect for storing grain or other dry ingredients.
Can be used as a fermenter (would need to drill lid hole)
Also handy for cleaning and sanitising other equipment.

A stainless steel handle for FermZilla units. These handles are made from 304 stainless steel and suit the large family of FermZilla fermenters/uni tanks/bright tanks.

The handles are made from 5.5mm thick 304 grade stainless steel and held together with stainless bolts.

These handles are suitable to take load up to 100kg.

If a glycol chiller is a bit out of reach at the moment, but you want to use the Temp Twister in your Kegmenter or FermZilla, this little product can help you on your way to cool your fermenter. Simply submerge the pump in a large bucket with water and ice.