This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.

Does not include clear Pill Housing and double o-rings shown in the images

RAPT Pill circuit board sold seperately

This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.

Does not include clear Pill Housing and double o-rings shown in the images

RAPT Pill circuit board sold seperately

This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.

Does not include clear Pill Housing and double o-rings shown in the images

RAPT Pill circuit board sold seperately

Yellow RAPT Pill - Hydrometer & Thermometer (Wifi & Bluetooth).

The RAPT Pill allows true real-time specific gravity and temperature logging and control via wifi/bluetooth integration with the RAPT fermentation chamber, RAPT mobile app or RAPT IOT. 

TILT Hydrometer

Make brewing easier and more accurate with the Tilt Hydrometer. Check the specific gravity and temperature of your beer while it’s fermenting, without ever having to open your fermenter or pour out any of your precious brew. You can instantly read your brew's specific gravity and temperature on your compatible mobile device. It’s even compatible with the Grainfather App. See TILT Apps for more detail.

Available in red, blue, yellow and green. Please, note that if using multiple Tilt Hydrometers for different batches of beer, you’ll need to use a different colour for each batch. The app will not read multiple hydrometers of the same colour.

Each Tilt comes calibrated and ready to go with a pre-installed battery that lasts 12-24 months depending on usage. Just download the free app, sanitize your Tilt, drop in your fermenter, and start taking readings with your mobile device.

The specific gravity is accurate +/- 0.002 within the Tilt's range of 0.990 to 1.120. The thermometer is accurate +/- 1 degree F (+/- 0.5 degree C).

pH Buffer Solution - 3 Pack (4.00 / 6.86 / 9.18)

In order to keep your PH meter as accurate as possible, you will need to calibrate using our three buffer solutions. 
We would strongly recommend if you haven't used your ph meter in a while to always use a buffer solution before you start your brew.
If you do not have anyStorage Solution, we would also highly recommend you use this solution for storage after every use.
Directions for use:
1. Completely empty the powder into a clean 250mL glass beaker.
2. Add 250mL of deinoized water to the beaker.
3. Stir until the powder has completely dissolved.

pH solution is accurate to (-+) 0.01pH

Premium quality pH solutions from Hanna Instruments for calibrating your pH meter. 

Hanna’s line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.

Reported values are accurate to +/- 0.01 pH at 25°C.

A stick on, liquid crystal thermometer from Ss Brewtech.

- range: 2-24 degrees Celcius
- adhesive, will stick to side of any fermenter
- great for Brew Buckets and Mini Buckets

Stainless is a great conductor of heat, so adhesive thermometers like this are much more accurate on stainless fermenters than they are on plastic.

From: Ss Brewtech

A general all-purpose plastic jug with a measurement scale up to 250ml. Ideal for measuring small volumes of liquid.

We have many sizes of jug available, but this is the only one that is only big enough for 250ml. Ideal for measuring out clarifying agent and small volumes of sanitiser.