The K-Lok adaptors/quick disconnects are compatible with Andale (Snaplok), Lancer Pacific (Fatlock), Bracton (B-Lock) and other brands of draft beer quick lock fittings that are often seen in commercial pubs and bars.

These fittings include the collet and they attach directly to the back of your tap so the tap fits directly into the K-Lok Female x 3/4 Male (Font Adaptor).

Stainless Steel forward sealing Ultrataps to fit the latest Mangrove Jack's Kegerators, are now available individually. Note they can also be used on other homemade/custom kegerators or the like – as they are universal.
Comes with handle.

Note does not include shank.

This pretty handy kit contails all the seals needed for both the standard Nukatap and the Flow Control Nukatap.

The majority of these seals would never normally need to be replaced, but in the event of accidental loss / extreme commercial use please replace washers with the addition of food-grade lubricant to ensure their longevity.

If you have not changed your seals before, it's a great idea to take a note of which seal goes where as you remove the old ones!

This Nukatap mini & Nukatap FC spring is designed to suit all Nukatap Mini taps and also the Nukatap Flow Control (FC) tap.  This custom made 304 grade spring size is designed specifically to ensure your Nukatap stays closed when it should.

Simple let go of the tap handle and the tap will snap shut and prevent accidentally leaving the tap on and emptying the keg onto the floor.

DIY Tap Handle Inserts - Dual Threaded - 3/8″-16 threads, .625″ Length.

Want to make your own unique tap handles but the thread type is strange? These simplistic brass inserts are the answer.

All you'll need is a 12.7mm (1/2") hole drilled into your handle (Pine, Red Gum, Oak, Cherry, Maple, etc), then screw in with a large flat screw driver.

It is important not to push down too hard if you're going to using a screw driver, or wide drill bit. It will strip the thread. Let the piece cut into the wood. Ensure that it is straight.

Suits NukaTap and Intertap taps

The Nukatap FC (Flow Control) model is latest technology in flow control tap design giving you all the advantages of a forward sealing tap however still allowing you to control the flow speed using a simple flow control leaver on the right hand side of the tap. This makes balancing your beer lines a snap. This type of tap is typically suited to customers who are often switching from one beer style to the next and want maximum flexibility in their draft system. The Nukatap FC is also the first forward sealing tap ever manufactured that can be used with a spring return.  Historically on older tap designs such as the Intertap the FC it was not possible to make the self closing spring design work.  The new patented Nukatap FC design also includes this highly desirable feature.

KegLand is proud to introduce the much awaited duotight compatible Short Shank in Stainless Steel. Now the dreaded heating of hoses and stretching them over a barb and clamping them without a proper stepless clamp tool is a thing of the past. A complete push in Kegerator set up could be yours, or a custom jockey box font set up. Or upgrade the barbed short shanks you have now with our EVABarrier Double Walled hose with duotight by your side.

These long shanks are suitable to attach taps to a Jockey Box (esky) or Fridge/Freezer wall. You will need a 22mm Size Holesaw in order to get a snug fit.

Also Compatible with: Perlick, Brumby, Micromatic + many more.

They come with:
- 100mm Stainless 304 NukaTap Shank 
- duotight 8mm push in to 5/8" female thread
- Flat face external washer
- Flat Internal washer
- Brass Anchor Nut
- Ring collar

A stainless steel shank for your beer tap, with a bore size of 4.76mm (3/16").

Available in three sizes with shank lengths of: approx. 79mm, 105mm, and 130mm

Note there is no tail piece included.