If you have any questions, fill out our form to arrange a chat with one of our team to help you on your way.

Kegging

  1. 8L Oxebar - Mono - Polymer Keg with Cap and Handle 8L Oxebar - Mono - Polymer Keg with Cap and Handle
    $25.00

    8L Oxebar - Mono - Polymer Keg with Cap and Handle

    This 8L keg is light weight, compact and has high oxygen barrier properties with 3x better(less) gas transmission than traditional PET grades of plastic making it suitable for beer storage or other oxygen sensitive carbonated and non-carbonated beverages.

    This product is sold with the PCO38 cap however if you would like to dispense this product through a draft system we recommend the use of the PCO38 Tapping Head (KL20169).  The tapping head is sold separately and allows you to attach standard ball lock disconnects and pressure reliefvalve to the top of this keg design.


    What is Oxebar Mono
    Oxebar Mono is a PET polymer blend that utilises several polymers blended together to significantly improve gas barrier properties. When compared with standard PET plastic Oxebar Mono is able to reduce oxygen ingress and CO2 loss so your precious beverage is preserved and shelf life extended by x3. We recommend this product for beer stored in keg up to 6 months.

    Dimensions
    Diameter:155mm
    Height: 520mm

    Out of Stock
  2. PCO38 Tapping Head (Lid only) PCO38 Tapping Head (Lid only)
    $8.00

    PCO38 Tapping Head (Lid only)

    3 x PCO1881 Male Threads to PCO38 Female Thread


    The PCO38 keg system is an inexpensive keg system that utilises quality engineering plastics and efficient injection stretch blow mold processes to manufacture economical kegs and tapping heads for both home brewing and commercial beers.

    This particular tapping head kit is designed to be used in conjunction with a 35psi/2.5bar pressure release valve.
    1 x KB10537 - Red PRV 1881 Cap Combo (35psi/2.5bar)
    Do not exceed recommended pressure of 35psi.

    The PCO Kegs come in a range of sizes:
    8L PET Keg
    4L PET Keg - coming soon

  3. PCO38 Tapping Head Assembly Kit with Ball Lock Posts, Dip Tube and PRV PCO38 Tapping Head Assembly Kit with Ball Lock Posts, Dip Tube and PRV
    $19.95

    PCO38 Tapping Head Assembly Kit with Ball Lock Posts, Dip Tube and PRV

    This PCO38 tapping head assembly has been designed to suit standard PCO38 bottle necks such as the 8L PET keg.

    The PCO38 keg system is a inexpensive keg system that utilises quality engineering plastics and efficient injection stretch blow mould processes to manufacture economical kegs and tapping heads for both home brewing and commercial beers.

    This particular tapping head kit comes included with 2.5bar pressure relief valve, liquid and gas ball lock posts and dip tube.

    The plastics used in the tapping head can withstand a wide range of chemicals used in the brewing industry and relatively high temperatures (over 100C).

    NOTE: The 8L keg shown in the photos is not included.

  4. Replacement Silicone Elbow for PCO38 Tapping Head Replacement Silicone Elbow for PCO38 Tapping Head
    $1.50

    Replacement Silicone Elbow for PCO38 Tapping Head

    This silicone elbow is a replacement for the elbow provided in the PCO38 Tapping Head Kit.

    Allowing for a 90 degree connection between the barb on the yellow liquid plastic carbonation cap and the 6.3mm OD dip tube provided in the kit.

  5. Replacement PCO38 Wedge Seal Cap
    $2.00

    Replacement PCO38 Wedge Seal Cap

    Replacement lid for PCO38 PET kegs.

    Please note: All PCO38 kegs do not have a washer/seal/o-ring. It uses a wedge compression sealing much like a Coca-Cola Bottle does.

  6. Mangrove Jack's Mini Keg 10L
    $144.95

    Mangrove Jack's Mini Keg 10L

    No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg and perfect for smaller experimental batches.

    • Portable size
    • Pressure carbonate (using the ball lock cap)
    • Stainless steel body
    • Handles for easy transportation
  7. Mangrove Jack's Mini Keg 5L
    $104.95

    Mangrove Jack's Mini Keg 5L

    No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg and perfect for smaller experimental batches.

  8. KegLand Mini 360 Core Actuator Regulator - Sodastream & 16g & 74g Bulb Compatible KegLand Mini 360 Core Actuator Regulator - Sodastream & 16g & 74g Bulb Compatible
    $99.55

    KegLand Mini 360 Core Actuator Regulator - Sodastream & 16g & 74g Bulb Compatible

    Features:
    - Core Puncturing / Actuator - Zero gas lost to screwing in bulbs or Sodastream style cylinders.
    - Interchangeable ball lock disconnect orientations (e.g. 45° Premium Ball lock to 90° Stainless Disconnects)
    - 6.5mm duotight compatible hose barb, can also suit hose and stepless clamps (e.g. 4mm ID, 5mm ID or 6mm ID hose)
    - Heavily Protected Mini Guage Dial. (Also interchangeable to different ranges)
    - Common Pressure relief valve compatible. (65psi Green PRV as standard, compatible with 35psi Red and 100psi Grey)

    Please note this is not compatible with the 2.6kg or 5.0kg CO2 Cylinders.

     

    Out of Stock
  9. Glow in the Dark Mini Keg Neoprene Keg Parka / Jacket - 5L Kegs Glow in the Dark Mini Keg Neoprene Keg Parka / Jacket - 5L Kegs
    $17.95

    Glow in the Dark Mini Keg Neoprene Keg Parka / Jacket - 5L Kegs

    Glow in the Dark Mini Keg parka. 

    Features:

    1. 8mm thick neoprene. Most other keg parkas are only 4mm meaning they simply do not insulate as well

    2. 16gram CO2 bulb pockets

    3. Has velcro around the top so you can attach various accessories such as the neoprene lid (sold separately)

    4. Comes with heavy duty webbing sholder strap

  10. 10L Stainless Mini Keg 10L Stainless Mini Keg
    $90.00

    10L Stainless Mini Keg

    Mini Keg with 10 litre capacity are specifically designed for home brewing/growler dispensing. They are suited to small batches and to people who want to fit them into their standard domestic fridges.

    This mini keg system is great as a portable keg to take to parties, BBQs, or just having a few beers in the sun.

    You can naturally carbonate using priming sugars or preferably force carbonate and serve your beer with the ball lock lid/tapping head.

    Out of Stock