This stainless 4inch tri-clover ball lock lid will enable you to turn your kegmenter into a uni tank, pressurisable fermenter or so it can be used as a keg.

This lid comes with a red pressure relief valve (that opens at 2.5bar - compatible thread to Cornelius type PRVs).  The lid has accurately machined gas and liquid posts. 

This lid is ideally suited to also fermenting under pressure so you can use a spunding valve/adjustable pressure relief valve so you can naturally carbonate during primary fermentation.

Most commercial kegs will use a traditional type keg spear like d-type keg spear (American Sankey) or the a-type keg spear (German Slider).  These keg spears have been designed for commercial use and will use larger and high flow rate commercial keg.

We've seen some nifty tricks of how people wash their Kegerator lines if they have multiple taps. This compact solution is going to make that routine cleaning day a breeze without having to swap disconnects to the cleaning keg/bottle or dismantling multiple ball locks. Just jump on the jumper post.

6mm OD x 3mm ID (metric) 1/4"x1/8" (imperial) o-ring for replacing poppet seals on corny type keg posts.

Coupler replacement (bottom) O-ring. Keg couplers are used in many commercial and home environments.
This is a replacement seal for when the original seal gets worn out.

Compatible with Micromatic and all 'D and S' type couplers.

Dimensions: 24MM ID x 33.5MM OD

Replacement pressure relief valve (PRV) for corny kegs, MK4 Regulators, and FermZilla Lids.

This model is the green - 65 PSI version, also available in 35 and 100 PSI versions.

Replacement pressure relief valve (PRV) for corny kegs, MK4 Regulators, and FermZilla Lids.

This model is the grey - 100 PSI version, also available in 35 and 65 PSI versions.