No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collect and the hose can be removed.

These push in fittings are suitable to be used up to 100 psi.

No clamps Necessary!

Pressure Relief Valve (PRV) fitting for connecting onto a gas post so that you can release pressure while controlling the fill speed when transferring beer from one vessel to another.

Are you ever in a situation where you don't want to unhook your gas line from your kegs, or have ball lock disconnects that you need to clean over at the sink but don't want to take your gas line all the way over there? Well, Kegland thought of a better way. Why not fill a PET Bottle with your cleaner / sanitiser and pump it without gas!

This little device can also be used as a mini party keg without a gas source (should be consumed well within 24 hours of pumping). BYO Liquid disconnect, hose and picnic tap.

An MFL Check Valve to prevent backflow, with 1/4″ FFL outlet x 1/4″ MFL Inlet.

Use this check valve on ball lock gas connectors with MFL thread. Its internal mechanism prevents accidental back-flow of beer into the gas line on your kegging set up.

John Guest 5/16 x 1/4 FFL

Perfect for attaching a MFL fitting or connector to a 8mm "5/16" hose.

Quality fitting by John Guest.

Brand new replacement lid for corny kegs complete with new seal and pull-ring pressure relief valve.

Replacement Low2 keg lid o-ring seal for corny keg lids. Suitable for any 19L, 9.5L corny keg - ball lock or pin lock.

Also suits FermZilla 2" tri-clamp pressure lids.