Premium Plus Micromatic, dual guage CO2 Regulator for your kegging system. This high quality regulator will allow constant pressure supply at high output flow rates. Now comes with adjustment knob to alter the pressure, or use the allen key provided.

This Portable CO2 Kit will allow you to take full advantage of your kegs, and mini kegs in particular!

Dispensing a perfectly carbonated brew just got even easier.

With the portable dispensing kit, you can dispense straight from the keg (think party kegs!) which means you can take your home-brew to parties, BBQs and other gatherings.

The kit has an inlet for standard threaded disposable 16g CO2 canisters plus adaptors for Paintball cylinders, 74g CO2 cartridges and SodaStream cylinders!

A stainless steel gauge guard for MK4 regulators (Bump Guard).

Are you like us and bump and push in your kegerator too hard up against the wall with the gas bottle on the back, maybe you've broken a dial in the process of dropping or transporting your gas bottle with the regulator attached. Or perhaps you're in a busy cafe/bar and someone needs to change over the tank and they drop the regulator, smashing the dial. That's money wasted and time spent without whats on tap. If you're like us then you need our tough stainless steel regulator bump, bash, smash and drop (within reason) guard protector. Designed and built by those who are tired of replacing gauge and getting refills for a simple accident.

Unlike most Gauge Guards/Gauge Cages this particular design is made completely from one piece of 304 stainless steel so it won't rust over time.

These can be used with any kegerator as they are compatible with gas bottles with a standard thread. To use it with the new kegerators, you just need to remove the hose barb.

The Type 50 for Nitrogen - MK4 Dual Gauge gas regulator is the only regulator you'll ever need to buy for a deluxe nitrogen stout/cocktail setup. With a large body and precision diaphragm, this regulator provides high flow rates and very accurate adjustments in both PSI and KPA.

This high pressure extension hose is manufactured with Type 30 CO2 Male Thread on one end and a Type 30 CO2 Female thread on the other end.

This useful device will enable you to place your regulator remotely from your gas cylinder.  The reason to do this is so that you can place your gas cylinder on the ground then have your CO2 Regulator mounted to your wall or gas board where it's convenient and at eye level.

This hose is particularly useful if you are making up your own CO2 gas boards.

A new 5kg CO2 (Alloy) bottle, supplied full. This bottle holds more CO2 than most in homebrewing. The bigger the bottle, the cheaper the CO2 refill per kg.

We believe this bottle is priced very competitively.

This product has to be shipped as "Dangerous Goods" so please allow a day or two extra for delivery.

This is a fantastic way to make a CO2/Nitrogen gas board so you can control, monitor and display the different pressures to a multi-keg draft system.

These food grade, polypropylene regulator gas boards allow you to mount your mini inline regulators to your wall so you can supply gas to various kegs at different pressures. The mounting holes for the wall mounting are pre-drilled, the holes for the regulators are pre-drilled and this makes installation really easy.