A stainless steel shank for your beer tap, with a bore size of 4.76mm (3/16").

Available in three sizes with shank lengths of: approx. 79mm, 105mm, and 130mm

Note there is no tail piece included.

Beer Tap Shank - Stainless with 3/16" Bore - 130mm

A shank made from surgical grade stainless steel which is highly resistant to corrosion. This makes it ideal for wine and kombucha as well as beer. It has a bore size of 6.35mm (1/4").

Available in two sizes with shank lengths of: approx. 79mm, and 130mm

Note there is no tail piece included.

The Locking Wall Flange allows you to hold the shank securely in place by fitting three screws that mount the flange to the inside of the door or wall.

Chrome plated brass faucet coupling nut to attach a beer tap to a shank. Works with most standard beer fittings.
With this faucet replacement nut you can renew a worn-out part on your well-used draft faucet.

The Beer Tower Extension allows you to easily convert an existing single faucet tower into a two faucet tower. Recommended for use on 3" diameter metal beer towers, it includes a shank assembly, a drill bit and 3 screws for installation.

Replacement tower cap for standard 3” beer towers. The cap covers the top of the tower by fitting around the outside.

A polished chrome screw cover for a 3" draft beer tower base.

Material: Stainless Steel 304
Finish: Polished

From: Krome Dispense

External diameter of 115mm and an internal diameter of 75mm.

A stainless steel column shank 44mm long for your beer tap, with a 5mm barbed outlet and Tig welded elbow. Length: approx. 44mm (1.75") Bore size: approx. 5mm (3/16") Material: Stainless steel From: Krome Dispense