False Bottom for Ss Brewtech kettles 76L. These false bottoms feature a centre draw / drain and have all the fittings needed included in the box so they are plug and play with standard edition Ss Brewtech kettles. They also include a silicone gasket that seals off grain from getting around the edges of the false bottom.

Works with standard edition Ss Brew Kettles - not suitable for Brewmaster Kettles.

With the Grainfather Sparge Water Heater 40L, brewers can heat and keep up to 40L of sparge water at a specified temperature until it's needed. This means they can focus on the rest of their brew day, without having to worry about how or when they're going to heat large volume of sparge water, and avoid the need to use 2 (or more) smaller volume heaters.

The unit heats up to 40L (10.6 US Gal) of sparge water in approx. 50 minutes, so brewers simply start heating during the mash, and they can forget about it until it's time to sparge.

This digital turbo boiler is a quality made 304 grade stainless steel turbo boiler.

A good alternative to the T500 boiler.

The 35Liter size is the total rated size brimful, so typically if you are using this as a beer boiler you would probably only fill it up to 25-30L so you had 5-10 litres of head space to boil comfortably.

The boiler has a quality made stainless tap with stainless barb and 1/2inch thread so you can attach the wide range of other half inch fittings such as camlocks and many other fittings that we can supply.

The Hop Missile can be used either as a Hop Back or an Inline Hop Infuser. The difference being flushing your wort through the Hop Missile back into the boiler, or as a Hop Inline Infuser flushing the wort through the Hop Missile straight into your fermenter. Either way, you are going to have some serious fun getting a boost of aroma and flavour using this new method of hopping. For all you home hop growers, this is a must-have piece of kit to have to show off the best of your harvest.

SS O-Ring replacements for Brew Buckets and Mini Brew Buckets.

For use on Brew Bucket 3/8" Ball Valve. Includes:
- 4 pcs 8.5 mm x 1 mm Buna N 70 O-rings
- 2 pcs 16mm x 1.8 mm Buna N 90 O-rings
- 6 pcs total in this set (enough to replace all o-rings on one Brew Bucket valve)

From: Ss Brewing Technologies, USA