All-in-one Systems
-
$24.95BrewZilla Gen 4 - Heat Exchanger Dish (HED)
What does it do?
Due to the concave bottom and central draining hole, the wort being recirculated through the pump will pass through the malt pipe and then down through the boiler false bottom. The wort would normally then follow the path of least resistance, making a b-line for that drainage hole.What this Heat Exchanger Dish does is force that recirculating wort up to the edge of the BrewZilla base and pass over the elements for a longer period, this then aids in faster heating exchange with the wort, which can help you on a brew day reach those temperatures much quicker.
This is an upgradeable accessory to the 35L BrewZilla Generation 4 only. It is not compatible with any previous generations of BrewZilla, RoboBrew or DigiBoils.
-
$89.95Heavy Duty False Bottom for DigiBoil and BrewZilla
Designed exclusively for the 3 Vessel homebrewing market that wants to take full use of a DigiBoil to be used as a Mash Tun/Lauter Vessel. It can also be used on the BrewZilla Gen4 and 3.1.1 units if you wish.
-
New$29.95BrewZilla Gen 4 - 65L - Silicone Tube Kit for 25w Pump
This is a complete replacement silicone tubing kit for the pump and ball valve tubing on a 65L Gen 4 BrewZilla.
This is for the 25w pump model.
-
$79.95Brewzilla Boiler Extender - Extension Kit
Brewzilla Boiler Extension - for 35L and 65L units. Also suits Digiboils as well.
Ever wanted to punch out a few more litres of wort with your BrewZilla? Maybe you wanted more strike water for a super sticky batch. Maybe you get boil overs a lot and would like a bit of extra protection. Now theres a solution! The all new BrewZilla boiler extension that allows 12L headroom on a 35L unit and 24L on a 65L.
Turn that a 35L BrewZilla into a 47L behemoth, or the 65L Brewzilla to 89L! -
$29.95BrewZilla Double Pulley Set
This double stainless steel pulley set will make it easy to lift your malt pipe from your BrewZilla, Robobrew, Grainfather, Braumeister, Brewtools, or other single vessel brewery.If you are looking for the easy way to lift your malt pipe from your single vessel brewery then this is the easy way to do it. The setup includes all the parts you need. Simply screw the shackle into the roof or overhead beam and then secure the wall cleat and away you go. It will only take a couple moments to install. The double pulley is used so it's possible to lift the large malt pipe in the 65L BrewZilla unit.This stainless steel pulley set has been made from all 304 grade stainless steel, nylon and non-corrosive materials.Out of Stock -
$38.5035L BrewZilla Gen 3 - Bottom Screen for Malt Pipe with threaded socket
Replacement bottom screen for malt pipe. Can be used on Generation 2 models.
-
$25.00BrewZilla 35L - Replacement Top Screen for Malt Pipe
This piece helps when using the over flow pipe to not get grain into the boiler.
-
$69.95BrewZilla 35L - Replacement Malt Pipe
This is a replacement malt pipe for the BrewZilla 35L model. It can also be used on the Digiboil 35L model so you can use a malt pipe with the Digiboil 35L boiler.
270mm Diameter
385mm HighOut of Stock -
$29.9535L + 65L BrewZilla Gen 3.1.1 - LCD Display Screen (control panel)
This board will allow you to upgrade from Brewzilla 3.1 to 3.1.1 to take advantage of some new features. To see the difference or to do the upgrade you can see this instruction sheet that explains this upgrade in more detail.
If you currently own a 3.1 unit all you will need is the LCD Control Panel. You will not need a new PCB Board (Power Board)From: Kegland
-
$19.90Brewzilla Replacement Glass Lid 35L with hole
A replacement lid (no handle knobs) for your Robobrew / Brewzilla, with centre hole. Black knobs for the lid are sold separately.
