BrewZilla Gen 4 Neoprene Jacket / Parka with Recirculation Arm Cover

New and improved BrewZilla Gen 4 Neoprene Jacket for more stable mash temperatures and heat retention. Now made with 8mm thick neoprene, improved recirculation pipe insulation on both the boiler and the recirculation camlock arm.

If you brew outside where it is cold or windy, the Neoprene Jacket/Parka is a must-buy! Don't lose that heat to the atmosphere!

Available for both 35L and 65L Brewzilla Gen 4 units.

Yay, finally a wider mouth demijohn that will take our easy siphons!

You can get the Stopper without Hole or the Stopper with Hole to fit this demijohn.

Please note these demijohns come with a screw top lid rather than a swing top. The swing tops are not compatible with this demijohn.

Neck internal diameter 40mm

Buy a carton of 4 and save 10%

This black HDPE lid has been designed to be chemically resistant but also strong enough to hold up to 2.5bar pressure.

This lid can screw onto the top of your Fermzilla Collection Container and this allows you to use the Fermzilla collection contianer for other stainless fermenters with a 2 inch tri-clamp dump valve.

Note: clamp and container not included.

Compatible with any 2 Inch tri-clamp fitting. Primarily designed for the:
- FermZilla 2" Tri-Clamp Lid
- in conjunction with the 2" Tri-Clamp Hop Bong

If you are looking to put your FermZilla Tri-Conical / All Rounder in a Fermentation Chamber / Fridge, you will want to allow 420mm measured from the base of the ring collar to a comfortable level to pull the pressure relief valve to purge oxygen from the hop bong.

The Series X Double Tap Stainless Kegerator is perfect for anyone looking to put beer on tap at home or at a café, restaurant, or bar. It includes Nukataps, stainless steel font, and a MK4 CO2 Regulator. The only additional parts you will require are the gas cylinder and kegs.

A Cast Aluminium Cold Plate for beer dispensing. Made from a thick cast aluminium, this plate acts as a large heatsink to absorb heat efficiently from your beer.

Put up your hand if you've smashed or lost one of these BrewZilla glass lids, the answer will shock you!

We all do it, but if you're wanting to keep everything the same and want to be able to re-sell your BrewZilla, we'd recommend purchasing it for a full set.

FermZilla - Conical - Replacement Dual Threaded Cone Piece, Cone Ring Nut, Cone Gasket

This replacement kit is compatible with:

FermZilla 27L - Conical Fermenter

FermZilla 35L - Conical Fermenter

FermZilla 55L - Conical Fermenter

O-Ring included and attached on the Dual Threaded Cone Piece