This handy little strap will make cleaning and transport your FermZilla All Rounder 30L or 60L an absolute breeze. Simply attach through both sections of the base in the orientation you wish. Slide up and out of the little buckle pieces making sure that the buckle is facing towards you, then strap in and strap down!

The Strap is long enough for the 60L FZ-AR and 30L. We recommend rolling up the excess strap and paper clipping or cutting to suit the 30L. 

This thermowell fits into any 8mm Hole and can literally be installed into almost any fermenter lid.

A stainless steel thermowell for temperature probes. Designed for Ss Brew Tech products but the universal weldless design can be used with other fermenters.

- Brewer's Grade 304 Ss
- Installs into 17mm punched / drilled hole
- 6.5 mm inner diameter of tube opening

Available in these sizes:
- 100mm
- 200mm
- 300mm

Includes one o-ring.

Blow Off Barb For FTSs and Ss Brew Bucket Lids.

- Custom tooled specifically for FTSs/Brew Bucket lids
- Fits into blow off / airlock hole
- 1/2" hose barb
- 304 Stainless construction
- Includes 1 spare o-ring (1 o-ring for use / 1 spare)

This jacket will keep your FermZilla All Rounder 30L cool in summer and warm in winter. It can also be used with a heater belt to warm up the wort if the heat from the fermentation isn't enough. To control the temperature, we suggest using a MKII Programmable Temperature Controller.

This jacket also completely blocks any light/UV to prevent light struck or skunked beer.

FermZilla Plastic Pressure Kit - suits both 27L, 55L FermZilla and All rounder fermenters.

For use with the Sterilock Airlock Contains 4 odour absorbing capsules to remove fermentation odours. 

CIP Spray Ball Tri-Clamp Attachment

- Made from 304 Stainless Steel
- 3" tri-clamp cap with 1/2" MPT
- 2 bar / 29 psi recommended 
- Use on any 3" tri-clamp fitting