Equipment
-
Bottle Brush - small tip
Bottle Brush, Standard Small Tip. The length from the handle end to the end of the main part of the brush is 52cms, helpful for getting in to small nooks and crannies. The end is small enough to fit inside most standard bottlenecks.
-
Low Volume CIP Spinning Spray Rotor
Introducing the new Low Volume CIP Spray motor. An inexpensive low-flow spray head for low voltage pumps as low as 6w up to 25w. The perfect spray head that has multiple uses over your brew day.
Clean In Place (CIP) with your 35L, 65L or 100L BrewZilla (can be fitted to the other branded units)
-
Nylon Hose Brush - Long - 3/16"
A long Nylon Hose Brush for beer line cleaning on your kegging system.
Size: 3/16" (3mm) x 66" (167cm)
Made by: Krome Dispense
Nylon Hose Brush - Long - 3/16"
Makes cleaning draft and beverage lines easy with this long handled nylon bristled hose brush.
The importance of properly cleaning beer lines is often understated. In fact, improper line cleaning is likely the single most likely cause for poor quality customer beer. Clean your draft lines with the proper cleaners and equipment regularly for high quality beer.
Out of Stock -
KegLand Distilling Parrot - Stainless Steel (includes alcometer)
What is a Distilling Parrot?
A distillers parrot is a piece of kit that allows you to take alcohol gravity measurements using an Alcometer continuously throughout your pot or reflux run. It should be placed inline of your distillation outlet so that the drops of distillate fall directly into the tallest collection cone. But only placed in-line AFTER you collect your foreshots.Out of Stock -
Still Spirits T500 Top Clamp
Top clamp for Turbo 500 Condenser. The top clamp secures the main condenser to the top cap. -
Essencia Express 50cm Copper Tri-clamp Extension
Extend the reflux column of your still with this 2" Tri-clamp extension.
Extending your column helps increase alcohol purity.Contains one 50cm extension, a single tri-clamp and gasket.
Compatible with T500 attachment kit