Still Accessories
-
New$5.95Still Spirits Air Still Pro Capillary Tip Pot Still Mode
Replacement stainless capillary tip for the Still Spirits Air Still Pro, used to control the spirit output flow rate in Pot mode.
-
$9.95 -
$3.00Silicone Seat Seal for DN40 to Still Spirits Alembic Condenser.
Silicone seat seal for DN40 to Still spirits alembic condenser. -
$13.95T500 Column Nut
T500 column nut for T500 reflux and Alembic condensers.
For the T500 column O-ring see here
-
$39.90Pure Distilling 1 1/2” Thread Adaptor | Male – Triclover
Lead free brass adaptor, screws into the base of a condenser with 1 1/2″ thread to convert to a triclover mount attachment. The adaptor has a screen to hold the condenser packing in place.
Out of Stock -
$29.90Pure Distilling 1 1/2” Thread Adaptor | Female – Triclover
Lead free brass adaptor, is attached to the boiler lid with the original locking nut of a different manufacturer to convert condenser with 1 1/2″ thread to a triclover mount attachment. The adaptor requires a 1 1/2″ Seal to make a sound join.
-
$134.90 -
$159.90Pure Distilling 500mm Copper Extension for condenser | Tri-clover 2" – Tri-clover 2"
Increase spirit purity and strength with this 500mm copper Extension. Adapts to Triclover hardware for a reflux still.
-
$169.95BrewZilla / DigiBoil Pro Sight Glass Distillation / Steam Condenser Lid
Suits Gen 4 and Gen 3 BrewZillas, Digiboils and older model Robobrews, for both 35L and 65L models.
Designed to be extremely sturdy when using heavier stills or off-center steam condenser units. Now you can watch your wash boil and see if it's foaming or about to puke. If you are brewing beer indoors you may want to use a steam condenser lid set, without having to take off the entire lid to do hop/salt additions, simply remove the 3" Sight Glass and throw in (take care when hot). -
$98.95Still Spirits Copper Parrot Head - Small
The Small Copper Parrot Head is a distiller’s parrot that provides the convenience of continuous, real-time, in-line ABV measurement of the spirit as it comes out of the still. Designed for use with the Air Still Pro and Air Still, this proofing parrot will let you track the ABV of your distillate without having to take samples along the way. This allows you to closely monitor the quality of the distillate and determine where to take cuts or stop your distillation.
