Sight Glass 2" for extending a Reflux condenser (packing not included)
Can also be used for a botanicals basket for Pot still distillation.

Not pressure rated.

Lead free brass adaptor, screws into the base of the Pure Distilling Boiler and attaches to a tri-clamp fitting

Lead free brass adaptor, screws into the base of the Pure Distilling Reflux or Pot Condenser to convert to a 2” tri-clamp mount attachment.

The Still Spirits Create+ Voltage Controller has been designed to enable finer control over heat input and the rate of wash being vapourised.

99.9% Solid Bare Copper Knitted mesh.  This mesh is a high-purity copper conductor used in craft distilling.

The Create+ Water Flow Regulator is designed for use with reflux distilling systems like the T500, this regulator ensures a steady, controlled water flow for consistent, high-quality results.

The Create+ Beeping Alarm Thermometer is a simple to us digital thermometer that allows your customer to set high and a low temperature alarms when using their Create+ T500 Column & Condenser, Alembic Copper Condenser or other compatible distilling equipment. After a temperature is set, the thermometer will beep to notify them that the set temperature has been reached so they can make adjustments to their waterflow or distillation as required.

2" condenser locking nut which attaches to the bottom of the Pure Distilling condenser.
Pairs with a Condenser Seal Silicon.

Fits both Reflux & Pot Pure Distilling Condensers.

100mm Tri-clamp extension to adapt to Pure distilling condensers.

Can be used between a sight glass and condenser, or for extending your condenser.
Extending any reflux condenser will increase alcohol quality, purity, and will also speed up the distilation process.