Still Accessories
-
Still Spirits Create+ Threaded Adapter Set
The Still Spirits Create+ Threaded Adapter Set converts a DN40 (or 1 ½ " BSPP) threaded connection to a 2" tri-clamp connection. The Threaded Adapter Set allows you to convert your existing Still Spirits Alembic or T500 distilling setups to connect to 2" tri-clamp accessories.
-
Distilling / Water Pump
Great little pump for recirculating your cooling water, can handle a little bit of head pressure as well. 3,500l/hr
-
Pure Distilling Sight Glass 1.5" Adaptor Kit
Seamlessly connect this Sight Glass to different distilling systems! Fits directly onto a boiler lid with a 49mm hole.
If you would like to know if this sight glass is compatible with your setup, please get in touch!
-
DN40 - tri-clamp conversion kit - for T500 Lid or Copper dome
Upgrade your T500 reflux or alembic condenser using this DN40 kit.
This will allow you to attach your T500 reflux or alembic condenser to any 2” tri-clamp accessory like the SS botanical sight glass, or Express 50cm Copper Tri-clamp Extension using your standard T500 lid, or Pot Still Copper Dome Top.
Out of Stock -
BrewZilla + DigiBoil S.S Adjustable Lid Clamps - Short (4pcs/set)
Get the exact tension you need with your BrewZilla, DigiBoil or even GrainFather with Kegland's Stainless Steel Adjustable Clamp Set. Adjust to your specification.
This set of 4 adjustable stainless steel clamp set suits the 35L and 65L BrewZilla Gen 3 all the way to Gen 4 as well as all 35L and 65L DigiBoils. It also suits the 12L and 24L Boiler Extensions.
-
T500 tri-clamp Adaptor - DN40
Use this DN40 tri-clamp adaptor to fit your T500 reflux condenser to any 2″ tri clamp fitting.
Simply screw into the base of the T500.
-
Still Spirits Sight Glass Botanical Basket Set (2")
This high-quality sight glass botanical basket set is designed for use with 2” tri-clamp compatible distilling systems.
This set can be used as a sight glass to monitor your distillation run or attach the mesh filters as per the instructions to convert the sight glass into a botanical basket. The sight glass will hold up to 150 g (5.2 oz) of botanicals and is suitable for fine botanicals.
-
Wire lid Clamp for G30 / T500 Boilers
Clamping Wire Clips for T500 Boilers and Grainfather G30 connect.
This product will require welding to adhere the clamps to the boiler unit.
-
BrewZilla / DigiBoil Pro Sight Glass Distillation / Steam Condenser Lid
Suits Gen 4 and Gen 3 BrewZillas, Digiboils and older model Robobrews, for both 35L and 65L models.
Designed to be extremely sturdy when using heavier stills or off-center steam condenser units. Now you can watch your wash boil and see if it's foaming or about to puke. If you are brewing beer indoors you may want to use a steam condenser lid set, without having to take off the entire lid to do hop/salt additions, simply remove the 3" Sight Glass and throw in (take care when hot). -
Still Spirits Copper Parrot Head - Small
The Small Copper Parrot Head is a distiller’s parrot that provides the convenience of continuous, real-time, in-line ABV measurement of the spirit as it comes out of the still. Designed for use with the Air Still Pro and Air Still, this proofing parrot will let you track the ABV of your distillate without having to take samples along the way. This allows you to closely monitor the quality of the distillate and determine where to take cuts or stop your distillation.