Cleaning
-
Low Volume CIP Spinning Spray Rotor
Introducing the new Low Volume CIP Spray motor. An inexpensive low-flow spray head for low voltage pumps as low as 6w up to 25w. The perfect spray head that has multiple uses over your brew day.
Clean In Place (CIP) with your 35L, 65L or 100L BrewZilla (can be fitted to the other branded units)
-
Star San Sanitiser - bulk (250ml)
STAR SAN is a high foaming no-rinse sanitizer. Dilute with water at 1.6ml Star San to 1l of water. Let the solution touch all surfaces that need to be sanitized and leave for at least 2 minutes. -
HS No Rinse Sanitiser 25g
Effectively sanitises brewing, winemaking, and distilling equipment with no rinsing required. -
Grainfather High Performance Cleaner - 500g
This High Performance Cleaner is specially formulated to be used with the Grainfather. It removes hard to clean proteins from your Grainfather without the need for tedious scrubbing. Perfect for cleaning hard to reach places such as the Counter Flow Wort Chiller, pipes and pumps. -
PBW - Powdered Brewery Wash - Powder-450g
PBW - Powdered Brewery Wash - an alkaline cleaner that can replace caustic soda. It is safe on skin as well as soft metals such as stainless steel, aluminum, and on plastics. It does not need excessive heat to work properly. -
HS Cold Water Cleaner Detergent 25g
Effectively cleans and deodorises brewing, winemaking and distilling equipment prior to sanitising. -
Williams Warn BrewCleaner 500g
BrewCleaner Brewery Detergent (BCBD) is an alkaline, non-caustic, environmentally and user friendly cleaner.
BCBD is an alkaline detergent that has been proven to be more than an effective substitute for caustic soda cleaners. Because of its unique formulation of detergents and mild alkalis, it is safe on skin as well as soft metals such as stainless steel, aluminium, and on plastics. BCBD uses active oxygen to sanitise and penetrate carbon or protein soils.
BCBD formulation can be used as a CIP or soak cleaner because it does not require excessive heat as do most caustic based cleaners.
-
Star San Sanitiser
STAR SAN is a high foaming no-rinse sanitizer. Dilute with water at 1.6ml Star San to 1l of water. Let the solution touch all surfaces that need to be sanitized and leave for at least 2 minutes. -
Copper Cleaning Agent (CCA)
240gm For use with all copper mesh After each distillation remove copper mesh from the tower and soak in copper cleaning agent for 15 - 30 minutes 1 tablespoon per litre of water Packed in Timaru, New ZealandOut of Stock -
StellarSan Sanitiser 500ml
StellarSan Sanitiser 500mL - 100% Food Grade non-rinse sanitiser that can be diluted to 500L with the dual chamber mixing bottle compartment. Simply twist off the small measuring compartments lid, squeeze the bottle and it will start to fill that chamber only.
This is a direct replacement for Star San.