Taps, Towers and Accessories

  1. NUKATAP duotight (Black) Short Shank - (duotight compatible)
    $25.00

    NUKATAP duotight (Black) Short Shank - (duotight compatible)

    These black stainless steel duotight compatible short shanks are the perfect addition to your black phantom font tower. Couple this with the Black NUKATAP SS Stealth bomber for the ultimate sleek and stealthy draught setup for your kegerator or home bar.

    Item Includes:

    - Blank Stainless Steel Shank with a 6.5mm duotight compatible barb.
    - Ring collar
    - Nut
    - Right angle font collar to suit font
    - Shaped internal collar to suit font

  2. Quadruple Tap stainless Font Only
    $90.00

    Quadruple Tap stainless Font Only

    These robust stainless steel fonts will last forever and will not corrode like many other chrome plated steel fonts.

    The Quadruple fonts do not have any insulation foam. If you do want to insulate, you could either use expandafoam if you're a more permanent operator. Or a trimmed pool noodle. 

    These fonts are perfect for air cooling and use with the Font Fan Kit.

    Specifications:
    - 400mm Tall (without taps)
    - 125mm Diameter

  3. K-Lok Female x 3/4 Male (Tap Shank)
    $36.50

    K-Lok Female x 3/4 Male (Tap Shank)

    The K-Lok adaptors/quick disconnects are compatible with Andale (Snaplok), Lancer Pacific (Fatlock) and other brands of draft beer quick lock fittings that are often seen in commercial pubs and bars.

    These are the font adaptors that are designed to fit any fonts with ¾ threaded font such as our Flooded Fonts.

    These K-Lok couplers are designed to be a dry break so when you disconnect the male side the flow is cut off.

  4. K-Lok Male x Tap Shank Adaptor K-Lok Male x Tap Shank Adaptor
    $15.00

    K-Lok Male x Tap Shank Adaptor

    The K-Lok adaptors/quick disconnects are compatible with Andale (Snaplok), Lancer Pacific (Fatlock), Bracton (B-Lock) and other brands of draft beer quick lock fittings that are often seen in commercial pubs and bars.

    These fittings include the collet and they attach directly to the back of your tap so the tap fits directly into the K-Lok Female x 3/4 Male (Font Adaptor).

    This particular fitting is designed so that the ball bearing lock onto the male piece preventing the tap from rotating.

    These K-Lok couplers are designed to be a dry break so when you disconnect the male side the flow is cut off.

    NOTE: These are not compatible with the Intertap Auto Close Spring

  5. Ultratap S/S - includes handle and return spring Ultratap S/S - includes handle and return spring
    $59.95

    Ultratap S/S - includes handle and return spring

    Stainless Steel forward sealing Ultrataps to fit the latest Mangrove Jack's Kegerators, are now available individually. Note they can also be used on other homemade/custom kegerators or the like – as they are universal.
    Comes with handle and return spring.

    Note does not include shank.

  6. Nukatap Seal Kit Nukatap Seal Kit
    $5.95

    Nukatap Seal Kit

    A replacement set of seals for your Nukutap beer tap. Also fits Intertap taps.

    The majority of these seals would never normally need to be replaced. But in the event of accidental loss / extreme commercial use, please replace said washers with the addition of food-grade lubricant to ensure their longevity.

    Select either Standard Nukatap or Flow Control Nukatap.

  7. Black Phantom Stainless Font Only Black Phantom Stainless Font Only
    $65.00

    Black Phantom Stainless Font Only

    The all new Phantom Series Black Font. The beautiful matte black finish looks great in a minimalist environment on the ever-popular Series X Kegerator.

    These fonts are also insulated with closed cell insulation foam inside the font so it fits snugly preventing heat ingress into your beer. However, the Quadruple fonts do not have any insulation foam. If you do want to insulate these fonts, you could either use expandafoam if you're a more permanent operator, or a trimmed pool noodle.

    These fonts are perfect for air cooling and use with a Font Fan.

    Specifications - 1-3 taps:

    • 320mm Tall (without taps)
    • 78mm Diameter
    • Base Collar Diameter 111mm
    • Internal Foam Insulation

    Specifications - 4 tap:

    • 400mm Tall (without taps)
    • 125mm Diameter

     

  8. Beer Tap Shank - 100mm - All Shank Beer Tap Shank - 100mm - All Shank
    $19.95

    Beer Tap Shank - 100mm - All Shank

    100mm All Shank (5/8" Plain Thread) - 304 Stainless Steel

    These long shanks are suitable to attach 5/8" Female fittings. Or if you want to have a 5/8" Ball lock post on the opposing end to disconnect and use multiple hoses for different uses/kegs.

    They come with:
    - 100mm Stainless 304 Straight 5/8" BSP Shank
    - Black Shank Washer (used to tidy up the hole you've cut)
    - Brass Anchor Nut

  9. Nukatap [FC] Auto return Spring Nukatap [FC] Auto return Spring
    $2.00

    Nukatap [FC] Auto return Spring

    The NukaTap FC is the worlds only forward sealing flow control tap that can use a auto close spring.  By inserting the spring between the flow control device and NukaTap shuttle the tap to automatically close when you let go of the handle.

    This is perfect for customers who may not remember to completely turn off the tap after each pour. Or for those with little kids or pesky cats that knock everything around!

    This very inexpensive spring can save you from emptying an entire keg and then loosing a whole bottle of gas.

    (Please Note: The spring is not compatible with the NukaTap SS Models)

  10. Insulating Neoprene Kegerator Tower Tube 115mm (4 Tap) Insulating Neoprene Kegerator Tower Tube 115mm (4 Tap)
    $35.00

    Insulating Neoprene Kegerator Tower Tube 115mm (4 Tap)

    This unit has been designed to fit our standard Quadruple Tap Kegerator Tower or any other 115mm diameter font. It does not fit 1-3 tap kegerator towers.

    Keep your beer icy-cold with this insulated tower/font cover right out of the first drop. Most kegerators that we sell include a font fan that blows cold fridge air up the font. With that said heat loss from the stainless font surface causes the font temperature to rise meaning that a small amount of beer contributes to the "first pour foam effect".

    These extra thick covers are made from 7mm neoprene, meaning your beer will stay cold even if the hot sun is beating down directly on the font.

    This helps save power as your fridge will not be working as hard, and you pay less in power. So this thing practically pays for itself!

    How to Install

    1. Remove taps from the font. (no need to remove the shank from the font, just the taps).

    2. Pull the insulated cooler down over the font.

    3. Mark the tap holes and use a sharp pair of scissors to cut a hole in the neoprene jacket.

    4. Re-attach the taps.

    NOTE: Nail cutting scissors are particularly good for this application, or a 5/8" Hole Punch.

    Please note these only come with a Kegland logo. They are not sold in plain black.