Taps, Towers and Accessories

  1. Krome Beer Tap Shank - 70mm (C318) Krome Beer Tap Shank - 70mm (C318)
    $19.90

    Krome Beer Tap Shank - 70mm (C318)

    A chrome plated brass shank 70mm long for your beer tap, with a barbed 6.35mm outlet.
  2. Krome Beer Tap Shank - 140mm (C327)
    $24.95

    Krome Beer Tap Shank - 140mm (C327)

    A chrome plated brass shank 140mm long for your beer tap, with a barbed 6.35mm outlet.

    Length: approx. 140mm (2-3/4")
    From: Krome Dispense

    A shank is used to attach a beer tap to a housing (i.e. a fridge door) and to the beer line.
    The length of the beer shank determines how thick the wall/door can be you can attach the beer tap to.
  3. Neoprene washer for 5/8" hex nut and barbtails
    $1.00

    Neoprene washer for 5/8" hex nut and barbtails

    Ensures there are no leaks when using a 5/8" hex nut and an angle or straight barbtail.

    The purpose of Neoprene washers is to create a tight fitting seal. The flexibility of rubber means that the bearing surface can be compressed for a tight fit. The neoprene also provides effective protection against corrosion.
  4. Blackboard / Whiteboard Tap Handle with led light & pour counter Blackboard / Whiteboard Tap Handle with led light & pour counter
    $65.00

    Blackboard / Whiteboard Tap Handle with led light & pour counter

    Most conventional tap handles are designed to simply open and close the tap. How boring! The Coolest-Tap-Handle-of-All-Time can do so much more than that.

    The Coolest-Tap-Handle-of-All-Time can be used as a blackboard or whiteboard. Both blackboard and whiteboard stickers are included with the handle plus 2 x pieces of chalk. This makes it easy to label which beer is on tap. Perfect for beer taps that are often switching from one beer style to the next.

    The Coolest-Tap-Handle-of-All-Time is also able to accept a standard lithium ion battery (18650 size) that slots into the handle base, it can also be powered by the 4.2v charger alone. Once powered the tap handle can illuminate an LED strip around the boarder of the tap.

    Three LED settings can be used: 
    1. On all the time 
    2. Off all the time 
    3. Only turn on for 60 seconds each time the tap is pulled.

    The on-board mercury switch is also used to cycle a digital counter that is on the left side of the tap. This counter counts how many beers you have poured. A reset button on the underside of the tap handle can also reset the counter.

    Note: The Lithium Ion Battery and the Charger are not included with the handle, if you want the handle to be illuminated you will also need to purchase these separately.

  5. Triple Tap Font Tower Plastic ABS/PC Chrome Plated
    $53.00

    Triple Tap Font Tower Plastic ABS/PC Chrome Plated

    These economical fonts are a good choice particularly if you are concerned about energy consumption. They are made from Chrome Plated ABS/PC and despite being less expensive than the stainless ones they have better insulation performance. During testing on our Series 3 Kegerator these fonts will reduce power consumption by approximately 12% when compared with the stainless fonts and about 23% when compared with cheaper Chinese “no-brand” fonts when operated using a font fan and with ambient temperature of 25C Specifications: - Internal foam insulation and high insulation factor - 78mm diameter - 104mm mount flange - 370mm high (without taps) Note: does not include taps
    Out of Stock
  6. Triple Tap Beer Tower for Kegerator (with taps)
    $200.00

    Triple Tap Beer Tower for Kegerator (with taps)

    Triple Tap Beer Tower for Kegerator Triple Tap Beer Tower for dispensing your beer from kegs.
  7. Plastic Picnic Tap Plastic Picnic Tap
    $7.00

    Plastic Picnic Tap

    A black plastic picnic tap - the quick, economic and easy solution to serve beer from a keg. Commonly used as part of minikeg setups which are great for taking on the road, but also a good option for someone who is looking for the cheapest method of setting up a home kegerator or keezer.

    Compatible with most beer line sizes, although we recommend using commercial grade 4mm Ledavin to reduce the required length of beer line to balance your serving system.
  8. Nukatap Stout Spout Nukatap Stout Spout
    $16.90

    Nukatap Stout Spout

    The Stout Spout extension can be used on any of the Nukatap beer taps. It has a removable creamer/aerator disc inside that is specially made to serve beers infused with nitrogen gas, and allows the nitrogen gas to flow smoothly through the faucet with the beer to create a smoother, creamier beer.

    Simply un-screw the regular nozzle and screw on the Stout Spout and use as you would a stout tap. Also compatible with Intertap models.
  9. Nukatap Growler Filler Spout Nukatap Growler Filler Spout
    $8.90

    Nukatap Growler Filler Spout

    The Growler Filler Spout extension can be used on any of the Nukatap beer taps. The spout has a 13mm barb which you can attach some hose so you can fill your growler from the bottom up to minimise foaming.

    Simply un-screw the regular nozzle and screw on the Growler Filler Spout with hose attached and use as you would a growler filler tap. Also compatible with Intertap models.

    We recommend using silicone hose, available separately.
  10. Black Plastic Draft Tap Handle - Long slender Black Plastic Draft Tap Handle - Long slender
    $4.10

    Black Plastic Draft Tap Handle - Long slender

    A standard plastic handle for beer taps, with threaded brass insert to fit most faucets. Our most popular selling faucet handle.

    One of many kegging accessories that we stock.

    From: Krome Dispense