Measuring
-
$22.95pH Electrode Storage Solution
This is a solution that can be used to store your pH electrode.
To ensure an optimum response time, the glass sensor tip and the reference junction of the pH electrode should be kept moist and not be allowed to dry out when not in use. Placing the electrode in a small glass filled with storage solution or replacing the solution in the protective cap is a suitable way to store the electrode. The solution should also be used to rehydrate the electrode after a cleaning procedure by soaking for at least one hour before taking measurements.
Note: never store pH or ORP electrodes in distilled or deionised water. Doing so will shorten the life of the sensor.
Hanna storage solutions are specially formulated to have an expiration of 5 years from manufacture for an unopened bottle.
From: Hanna InstrumentsOut of Stock -
$95.00Pen style digital pH meter - 0.01 pH resolution
This professional ph meter is designed to measure and display both pH levels and temperature with very high accuracy. Featuring IP67 - 100% splashproof & dustproof, selectable °C & °F, large display screen, replaceable electrode, 3-point calibration system and comes with free 3 pH Powder (pH4.00, pH6.86 & pH9.18).
It comes with built-in Automatic Temperature Compensation (ATC), you don't have to worry about the effect of temperature change on pH level.
It will simultaneously measure the temperature as well.
You can replace the probe, which is stored in an embedded sponge cap.
Batteries (LR44) included!
Out of Stock -
As low as: $155.00
Home Brewer Water Analysis Report
Get your brewing water tested at a laboratory. The first step to water modifications is to know your brewing water.
If you buy this report, we ship to you the sample containers, pre-paid freight to your closest laboratory (Hamilton, Blenheim or Christchurch), instructions, ice packs and a polystyrene shipping box to keep your sample cold during transport.
Completed test results are emailed back to you once available.
We believe this is currently the only affordable laboratory grade water test aimed at home brewers in New Zealand.
Your sample is being tested for the following parameters:
Calcium
Magnesium
Sodium
Chloride
Sulphate
Total Hardness
Total Alkalinity
pH
The optional add on report uses the data from your laboratory water report to give you tailored advice on how to modify your water for a variety of beer styles.
This is highly recommended unless you know how to interpret & use water analysis data.
You can find an example report here. -
$4.95Plastic Trial Jar - 100ml
100ml plastic trial jar. Ideal for taking hydrometer readings.
Note: these trial jars are slightly shorter than previous batches. They are therefore not suitable for the Alla hydrometers, but fit well for the Keg King ones. -
$3.00pH 7.00 Buffer Solution Powder for pH Meter
pH Buffer powder 7.00 to use for calibration of pH meters. Designed to be used with R.O water at 25 degrees celcius. Add contents to 250ml of water until dissolved.Out of Stock -
$3.00
pH 4.01 Buffer Solution Powder for pH Meter
pH Buffer powder 4.01 to use for calibration of pH meters. Designed to be used with R.O water at 25 degrees celcius. Add contents to 250ml of water until dissolved.Out of Stock -
$3.00pH 10.01 Buffer Solution Powder for pH Meter
pH Buffer powder 10.01 to use for calibration of pH meters. Designed to be used with R.O water at 25 degrees celcius. Add contents to 250ml of water until dissolved.Out of Stock -
$3.00
pH 9.18 Buffer Solution Powder for pH Meter
pH Buffer powder 9.18 to use for calibration of pH meters. Designed to be used with R.O water at 25 degrees celcius. Add contents to 250ml of water until dissolved.Out of Stock -
$3.00
pH 6.86 Buffer Solution Powder for pH Meter
pH Buffer powder 6.86 to use for calibration of pH meters. Designed to be used with R.O water at 25 degrees celcius. Add contents to 250ml of water until dissolved.Out of Stock -
$8.00
