1. Mangrove Jack's Heat Pad 220-240V Mangrove Jack's Heat Pad 220-240V
    $39.90

    Mangrove Jack's Heat Pad 220-240V

    Mangrove Jack's Heat Pad 220-240V. Our biggest sealing termperature control device, with a 25W power output and no moving parts they are much more reliable than using a lightbulb.

    You can stand your fermenter on top of the heat pad for direct heat, although it is not recommended to do this for the first 24hours of fermentation. For full temperature control, this product can be paired with the MKII Programmable Temperature Controller. The heat pad can be used to provide ambient heat when left on it's side, if you have a well insulated fermentation chamber.
  2. Mangrove Jack's Heater Belt 220-240V
    $46.00

    Mangrove Jack's Heater Belt 220-240V

    Mangrove Jack's Heater Belt 220-240V. (25W) A heater belt is designed to be secured around your fermenter to help keep it at the right temperature during fermentation. It is possible to regulate the heating of the liquid by adjusting the height of the belt around the fermenter. For more accurate temperature controller consider pairing this with the MKII Temperature Controller which will monitor temperature and switch the belt on and off as required.

  3. MKII Programmable Temperature Controller
    $99.00

    MKII Programmable Temperature Controller

    MKII Programmable Temperature Controller
  4. ZL-6290A Temperature Controller-Bare (similar to STC-1000)
    $30.00

    ZL-6290A Temperature Controller-Bare (similar to STC-1000)

    The ZL-6290A is a temperature controller similar to the STC-1000 you can use to control your fermentation temperature. It has a hot and a cool circuit which you can use to heat and ferment your wort depending on the setting of your controller. This is a bare bones controller, and you need to assemble the controller yourself. The easiest way to do this is to buy two cheap extension leads which you can use for all wiring and plugs/sockets, and then assemble into any suitable housing such as a Systema box. There are lots of easy to follow wiring videos available on Youtube. This controller's advantage over the STC-1000 is that you can separately set a low and high temperature which gives you more flexibility with controlling your fermentation temperature, i.e. you can set a min temperature of let's say 18C and a high of 25C for fermenting a Belgian Ale that you want to give the ability to free rise on it's own. You can also set both low and high to the same temperature and that effectively turns it into the same mode as a STC-1000 operates. Comes with a 2 meter long temperature probe to give you plenty of length to position the probe.
  5. Icemaster Glycol Chiller/Icebank with Digital Controller
    $1,095.00

    Icemaster Glycol Chiller/Icebank with Digital Controller

    The Icemaster Glycol Chiller/Icebank G40 is a commercial grade compact chilling dispensing solution. The G40 offers high performance for small to medium volume customers. It suits small bars, cafés, restaurants, serious home brewers, and nano breweries.

    The Icemaster will help cool a single fermenter of up to 500L capacity, or up to four home brew sized fermenters at one time. 

    It also comes with flooding impeller pump as standard, all enclosed inside the unit for efficiency and ease in transport. The G40 is also completely enclosed including the removable lid, this will aid in cooling performance due to less heat loss.

    The 8mm 304 stainless tubing is ideal for compression fittings to 6mm barbs for product lines located at the side of the unit making them easier to install under commercial bar tops where height restriction is limited. Ideally suited to be used for a glycol system, but can be used as an icebank instead.

    The G40 unit uses an STC-1000 temperature controller to control the temperature. 

    Note: this is for the unit only, it does not come with attachments for the lines such as compression fittings, tubing for product and chilling lines, or polypropylene glycol.

    Out of Stock
  6. Stainless Probe for Temp Controller (6mm)
    $12.90

    Stainless Probe for Temp Controller (6mm)

    Stainless Probe for Temp Controller (6mm)
    Out of Stock